Taylor Posted April 7, 2006 Share Posted April 7, 2006 how do i replace this? does it pop off or are there fixings!! i have a replacemnt cover that i want to put on u see! Link to comment Share on other sites More sharing options...
colsoop Posted April 7, 2006 Share Posted April 7, 2006 Is this for the front or rear ? Link to comment Share on other sites More sharing options...
Taylor Posted April 7, 2006 Author Share Posted April 7, 2006 sorry front passenger door Link to comment Share on other sites More sharing options...
colsoop Posted April 7, 2006 Share Posted April 7, 2006 You have to remove the door card. The cover is plastic riveted in place so you will probably have to drill out the rivets. Link to comment Share on other sites More sharing options...
Taylor Posted April 7, 2006 Author Share Posted April 7, 2006 HMMM how do i fit the new 1 back in then? Link to comment Share on other sites More sharing options...
aeropete Posted April 7, 2006 Share Posted April 7, 2006 cool, that answered one of my questions, is it pretty straight forward to take the doorcard off? is there anything to watch out for?? Link to comment Share on other sites More sharing options...
colsoop Posted April 7, 2006 Share Posted April 7, 2006 Have a loo at the attached EPC picture, it looks like you need to buy some fasteners from Toyota the part in black. Link to comment Share on other sites More sharing options...
colsoop Posted April 7, 2006 Share Posted April 7, 2006 cool, that answered one of my questions, is it pretty straight forward to take the doorcard off? is there anything to watch out for?? A guy called " heckler" has a guide for it : CLICK away Link to comment Share on other sites More sharing options...
Taylor Posted April 7, 2006 Author Share Posted April 7, 2006 its easy to take door card off really Link to comment Share on other sites More sharing options...
aeropete Posted April 7, 2006 Share Posted April 7, 2006 spot on! Link to comment Share on other sites More sharing options...
stt Posted April 7, 2006 Share Posted April 7, 2006 The speaker cover should not be riveted on but held in place by some spring clips,To remove them I found that getting a small screw driver into them to open it up works as for getting back on just get a small socket that would go over the plastic locator should push the spring back down to lock into place Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now