S7EVE Posted April 4, 2006 Share Posted April 4, 2006 Doing a few motorway trips in my Soop over next week or so, So I decided to put the bung back into my Nur Spec. What a difference it makes! I can hear that meaty roar of the straight six now - forgot what that sounded like! Doesnt seem to turn many heads now though. Dont know how long it'll stay in there. Link to comment Share on other sites More sharing options...
geoffvalenti Posted April 4, 2006 Share Posted April 4, 2006 I decided to put the bung back into my Nur Spec. Dont know how long it'll stay in there. Not long, unless you remembered to put the bolt in Link to comment Share on other sites More sharing options...
Kopite Posted April 4, 2006 Share Posted April 4, 2006 Not long, unless you remembered to put the bolt in Link to comment Share on other sites More sharing options...
monkey76364 Posted April 4, 2006 Share Posted April 4, 2006 Hey is that a dig as i forgot to do that to mine and it shot out at 70 on the motorway lol Link to comment Share on other sites More sharing options...
S7EVE Posted April 4, 2006 Author Share Posted April 4, 2006 Not long, unless you remembered to put the bolt in LOL - I very wisely threaded the screw into the bung when it was fitted. Ouch if it wasnt screwed in! Link to comment Share on other sites More sharing options...
merckx Posted April 4, 2006 Share Posted April 4, 2006 Quite a nice sound with it back in, couldn't find mine last time I looked! Link to comment Share on other sites More sharing options...
Kopite Posted April 4, 2006 Share Posted April 4, 2006 Quite a nice sound with it back in, couldn't find mine last time I looked! Checked in the bin? Link to comment Share on other sites More sharing options...
merckx Posted April 4, 2006 Share Posted April 4, 2006 Checked in the bin? I wouldn't be surprised if that's where it's gone. Link to comment Share on other sites More sharing options...
Branners Posted April 4, 2006 Share Posted April 4, 2006 Anybody else have trouble getting the baffle back in to the right position and getting the bolt in? Seems to take an age to get it in the right position. JB Link to comment Share on other sites More sharing options...
merckx Posted April 4, 2006 Share Posted April 4, 2006 If you look under the end of the exhaust you'll see a seam in the stainless which is line up with the hole. Align the threaded hole with this seam and carefully slide it in while looking underneath, worked every time for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now