JamieP Posted April 2, 2006 Share Posted April 2, 2006 im just about to fit bonnet pins can you guys give me some pics please of where you have fitted them with bonnet open and closed please regards jamie:) Link to comment Share on other sites More sharing options...
kirbz Posted April 2, 2006 Share Posted April 2, 2006 Not the best pic but you can see one and the other is just out of shot http://www.kirbz-zed.co.uk/5106_Supra_Engine.jpg Link to comment Share on other sites More sharing options...
JamieP Posted April 2, 2006 Author Share Posted April 2, 2006 thanks kirbz, thats what i needed to see, where people had fitted them;) btw not seen a single set up like that before Link to comment Share on other sites More sharing options...
bammbamm Posted April 2, 2006 Share Posted April 2, 2006 fitted some of these pins a few months ago, dam things have gone rusty, gota drill out the rivits to replace them now Link to comment Share on other sites More sharing options...
JamieP Posted April 2, 2006 Author Share Posted April 2, 2006 fitted some of these pins a few months ago, dam things have gone rusty, gota drill out the rivits to replace them now to be honest i dont like the look of them myself but my bonnet moves about so much at speed i think they are a necessity any other photos guys? Link to comment Share on other sites More sharing options...
SupraStar 3000 Posted April 2, 2006 Share Posted April 2, 2006 hope these help I used the rubber stoppers and threaded the hood pin into the center so i didn't modify the car or drill holes Link to comment Share on other sites More sharing options...
JamieP Posted April 2, 2006 Author Share Posted April 2, 2006 thanks ed:) Link to comment Share on other sites More sharing options...
SupraStar 3000 Posted April 2, 2006 Share Posted April 2, 2006 TIP: use a lazer to find the holes and trace the position onto the top of the bonnet. I used a keyring lazer and hung it from my garage roof above the car. Put the lazer dot onto the hood pin location and then shut the hood without disturbing the laser. Mark the lazer spot on the top of the bonnet and your holes should match up Link to comment Share on other sites More sharing options...
JamieP Posted April 2, 2006 Author Share Posted April 2, 2006 TIP: use a lazer to find the holes and trace the position onto the top of the bonnet. I used a keyring lazer and hung it from my garage roof above the car. Put the lazer dot onto the hood pin location and then shut the hood without disturbing the laser. Mark the lazer spot on the top of the bonnet and your holes should match up good advice there, thanks;) Link to comment Share on other sites More sharing options...
mkirby Posted April 2, 2006 Share Posted April 2, 2006 I'm gettng some of these for my bonnet http://www.linney.org/images19/photo-locking.jpg http://www.topsecretjpn.com/products/hoodpins4.jpg GTC are selling them for around £30 Mike (ex kirbz - finally paid up my alter ego so i can post again lol) Link to comment Share on other sites More sharing options...
JamieP Posted April 2, 2006 Author Share Posted April 2, 2006 they look much better but i bet there a pain to fit do you have a link for GTC? Link to comment Share on other sites More sharing options...
mkirby Posted April 2, 2006 Share Posted April 2, 2006 be worth asking any of the traders on here as im sure they could also get them?? but gtc website is http://www.gt-culture.com/ i like them because there also lockable as well Link to comment Share on other sites More sharing options...
JamieP Posted April 2, 2006 Author Share Posted April 2, 2006 many thanks;) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now