D8MOA Posted March 27, 2006 Share Posted March 27, 2006 has or can this be done to remove the viscus fan? if so is there and previous posts on what fan to use etc? Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted March 27, 2006 Share Posted March 27, 2006 Shouldn't be a problem! a large Pacet fan or one or two from another car will do the job, you will need a thermo switch of some kind, or something like an HKS fan controller. Link to comment Share on other sites More sharing options...
D8MOA Posted March 27, 2006 Author Share Posted March 27, 2006 hks fan controller?? whats that lol supose you could tap a thread in a alloy part of the cooling system and use a normal kind of switch that a normal system would use?? Link to comment Share on other sites More sharing options...
SimonB Posted March 27, 2006 Share Posted March 27, 2006 You can, but there's not much point. The viscous fan is very efficient and moves a lot of air. You'll be lucky to find an electric fan that will match it and if you do it will put a load on the alternator and hence the engine equivalent to the load the viscous fan does. The only reason for doing it would be to clear some room at the front of the engine bay or because your stock one has failed. Link to comment Share on other sites More sharing options...
D8MOA Posted March 27, 2006 Author Share Posted March 27, 2006 hmm thats a good point! i would of thought the viscous would of taken more power then a electric one but yer it is a lot to do with very little gain! i was going to put a twin fan on poss from a gs300? would of thought thay share the same rad! plus this would relocate the expanction bottle for when i get a front mount Link to comment Share on other sites More sharing options...
Wez Posted March 27, 2006 Share Posted March 27, 2006 If you are gonna do it look on MVP and speak to Dusty about the AAP shroud and dual fans, looks good http://www.mvpmotorsports.com/Templates/frmTemplateH.asp?SubFolderID=201&SearchYN=N Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now