terribleturner Posted March 19, 2006 Share Posted March 19, 2006 I've got some VIDEO i took when i got back that you can hear it on, but the basic sound was a knocking noise on throttle. It also made the noise when i turned the car over again but not when ideling. Sounds just like when Sabrinas engine went but her's was all the time. So what do people think it is?? What roughly am i looking at to spend to fix (and how long)?? And is there anything worth upgrading while it's being done?? I'm off to go cry now Link to comment Share on other sites More sharing options...
Bobbeh Posted March 19, 2006 Share Posted March 19, 2006 Doesnt sound good m8 Link to comment Share on other sites More sharing options...
Robert Posted March 19, 2006 Share Posted March 19, 2006 oooh that dont sound good James. Im not help with what it could be but defo something not right there mate. Link to comment Share on other sites More sharing options...
JamieP Posted March 19, 2006 Share Posted March 19, 2006 blimey:( Link to comment Share on other sites More sharing options...
CJ Posted March 19, 2006 Share Posted March 19, 2006 Possibly big ends gone. Hard to say without hearing it. Link to comment Share on other sites More sharing options...
piehound Posted March 19, 2006 Share Posted March 19, 2006 yep thats the same as mine matey and its going in tomorow for a rebuild and hopefully a crank grind and not a new crank, mine only does it on tickover at the mo though but its the same noise Link to comment Share on other sites More sharing options...
jazz1 Posted March 19, 2006 Share Posted March 19, 2006 damn that dont sound good at all, if that was mine i would be crying, all the best hope you get it all fixed:search: Link to comment Share on other sites More sharing options...
chilli Posted March 19, 2006 Share Posted March 19, 2006 oh dear, sorrt to hear that, sounds like a sloppy big end maybe? sounds a bit like when my big ends went on the lancia, it got rapidly much worst until undriveable - hard to be sure though Link to comment Share on other sites More sharing options...
Lucifer Posted March 19, 2006 Share Posted March 19, 2006 Well from that I would say its not piston or ring, most likley crank bearings. DO NOT DRIVE IT. We currently have 2 bottom ends ready to ship. One stock and one Fully built top spec. Sorry dude. Link to comment Share on other sites More sharing options...
Homer Posted March 19, 2006 Share Posted March 19, 2006 It doesn't sound good mate, but as I said in my PM I wonder if it could be a dead TC. I'm not sure if the TC is engaged while the car is in park... Did it drive okay (apart from the knocking)? Link to comment Share on other sites More sharing options...
terribleturner Posted March 19, 2006 Author Share Posted March 19, 2006 It doesn't sound good mate, but as I said in my PM I wonder if it could be a dead TC. I'm not sure if the TC is engaged while the car is in park... Did it drive okay (apart from the knocking)? Drving was fine. Temps had just gone up to 130 and i was backing it off to cool down when Sabrina said could i hear the noise. Link to comment Share on other sites More sharing options...
terribleturner Posted March 19, 2006 Author Share Posted March 19, 2006 Cheers everyone. The single was gonna go on next week too So close but yet so far. Link to comment Share on other sites More sharing options...
TLicense Posted March 19, 2006 Share Posted March 19, 2006 What's the oil level like? Link to comment Share on other sites More sharing options...
markrzs Posted March 19, 2006 Share Posted March 19, 2006 I'm no mechanic, but that don't sound good sorry bud Link to comment Share on other sites More sharing options...
Homer Posted March 19, 2006 Share Posted March 19, 2006 Look on the bright side, if it was going to go when under BPU, it'd sure have gone with a big single. Best it goes now than after you spend all that time and effort fitting the single only to find it goes pop. If it is the bottom end it might give you the opportunity to build a really solid motor from the ground up. It needn't cost a fortune, provided you can do some of the removal and fitting yourself Link to comment Share on other sites More sharing options...
jazz1 Posted March 19, 2006 Share Posted March 19, 2006 if it is the crank its a big job just hope so it aint:search: Link to comment Share on other sites More sharing options...
Nick1980 Posted March 19, 2006 Share Posted March 19, 2006 well, I haven't really got anything constructive to say, but sorry to hear about your prob dude makes the mk2 golf I bought requiring a new gearbox about 5 days after I got it seem slightly less significant now! Link to comment Share on other sites More sharing options...
Class One Posted March 19, 2006 Share Posted March 19, 2006 I take it the recovery co got it on the THIRD lorry!. Mate as I said I hope it's not terminal, and I'm sure it'll come back bigger and better than before. Link to comment Share on other sites More sharing options...
terribleturner Posted March 19, 2006 Author Share Posted March 19, 2006 The turbo sills were leaking and i did have oil making it's way out, but i had topped it up before we left this morning and should have been more than fine. The silver linning is that i can now get the bits replaced with new stronger bits just in time for the new turbo going on. I wouldn't mind having a go myself but think i'll leave it to the experts Link to comment Share on other sites More sharing options...
TLicense Posted March 19, 2006 Share Posted March 19, 2006 It's just that usually these things are caused by low oil pressure/ supply somewhere in the system, so if you rebuild, you may want to make sure the lubrication system gets a good look over too! Link to comment Share on other sites More sharing options...
lui Posted March 20, 2006 Share Posted March 20, 2006 Sorry to hear about this mate hope noyhing to serious mate & all gets fixed soon Link to comment Share on other sites More sharing options...
Digsy Posted March 20, 2006 Share Posted March 20, 2006 That sounds a little bit too "light" to be a big end to me. Is the noise deffo coming from the bottom end? Sure its not inside the cam cover? Link to comment Share on other sites More sharing options...
Stevie Boy Posted March 20, 2006 Share Posted March 20, 2006 Yeah sorry to hear what doesn't sound to good. Sounded fine the other night in Canary Wharf, Blackwall Tunnel n Millenium Dome, just goes to show.... you never know. Hopefully no more than a set of shells, guess new set of rings wouldn't do any harm before the Single goes on too. Although if you were planning on changing rods n pistons it's gonna get pretty costly, you may even end up in 3.2l or 3.4l "remortgage the house" stroker kit territory! Link to comment Share on other sites More sharing options...
kosmic Posted March 20, 2006 Share Posted March 20, 2006 Thats shit luck James....but as Darryl said maybe a good thing it went now before you fitted the single. Doesnt sound like a bottom end rattling tbh, may be wrong. May be worth takeing the cam covers off and seeing if its valve/cam related. If you need any help gimme a shout Link to comment Share on other sites More sharing options...
Stevie Boy Posted March 20, 2006 Share Posted March 20, 2006 Havn't actually heard/seen it yet as my 36k dialup still struggling away with the video, broadbands def overdue. Maybe i shouldn't say anyhthing till i've seen this eh.... come on.... hurry up! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now