Voo51 Posted March 6, 2006 Share Posted March 6, 2006 Yesturday i went on a rolling road in Shropshire. However, the graph chart and machernery wasnt designed for fast cars and so my bhp could not be recorded properly and the readings came right off the graph. theres two sets of lines because i had two runs, on the first my Supra just wasnt sticking to the rollers right up to fifth gear.So this had to be done ................................................. finally got grip and flames but still i wanted to know what my bhp was or even a rough idea. He only got it quater of a way through fifth gear and it had come off the chart so my bhp is 304 + just becuase it cudnt be recorded and thats what it got up to before it came off the chart. What are every one elses read outs with a standard tt all but the exhaust and filter? Quote Link to comment Share on other sites More sharing options...
Bobbeh Posted March 6, 2006 Share Posted March 6, 2006 Was that dyno sheet written with a Bryo? Just take it somewhere else. Quote Link to comment Share on other sites More sharing options...
Voo51 Posted March 6, 2006 Author Share Posted March 6, 2006 well- the actual print out was really faint so yes i went over it with a byro! Quote Link to comment Share on other sites More sharing options...
colsoop Posted March 6, 2006 Share Posted March 6, 2006 Thor are in coventry so not that far for you to go. Quote Link to comment Share on other sites More sharing options...
JohnA Posted March 6, 2006 Share Posted March 6, 2006 quality http://www.max-boost.co.uk/stuff/midget_basketball.jpg Quote Link to comment Share on other sites More sharing options...
Bob Posted March 6, 2006 Share Posted March 6, 2006 That is one scruffy graph! Voo, what mods have you made so far to get that power? Quote Link to comment Share on other sites More sharing options...
Bobbeh Posted March 6, 2006 Share Posted March 6, 2006 The RWHP figure doesnt sound too unrealisitc.. but as you're probably putting a car thats too powerful for their setup the figures arnt going to be spot on. Do you have a decat? 275rwhp = ~340bhp, which would sound about right with your mods (no decat) Quote Link to comment Share on other sites More sharing options...
Guru Posted March 6, 2006 Share Posted March 6, 2006 Thats one weird graph lol. Who was it down in Shropshire and how much did it cost? Quote Link to comment Share on other sites More sharing options...
tbourner Posted March 6, 2006 Share Posted March 6, 2006 Do you have a decat? 275rwhp = ~340bhp, which would sound about right with your mods (no decat) 19% transmission loss!!!!!! What is your guess for losses to the hubs then! Quote Link to comment Share on other sites More sharing options...
Bobbeh Posted March 6, 2006 Share Posted March 6, 2006 Under 10% on hub dynos. 18% was the figure for RR I was trying to guestimate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.