Mike B Posted February 18, 2006 Share Posted February 18, 2006 Been having a good look around and I can't find anything tasteful, anyone got any tips for some quality mesh for the nosecone (protect FMIC)? cheers! Link to comment Share on other sites More sharing options...
Steve Posted February 18, 2006 Share Posted February 18, 2006 Some here http://miami-gt.com/product_info.php/cPath/100_24_289/products_id/492?osCsid=c4a3353266f1416a18f202175f9f8408 Link to comment Share on other sites More sharing options...
Terminator Posted February 18, 2006 Share Posted February 18, 2006 That stuff looks tasty. Good air flow too. Some meshes reduce air flow far too much. Link to comment Share on other sites More sharing options...
merckx Posted February 18, 2006 Share Posted February 18, 2006 or http://www.espdesign.co.uk/esp.storefront/EN/Product/38801 Link to comment Share on other sites More sharing options...
hadyn Posted February 18, 2006 Share Posted February 18, 2006 Halfords or B&Q Link to comment Share on other sites More sharing options...
Paul Posted February 18, 2006 Share Posted February 18, 2006 ESP here too. It's woven stainless, excellent airflow and it'll stop a brick:) Had mine on about 3 yrs and it comes up like new cause it's stainless, much better than the cheap ali plasterers mesh and galvanised chicken wire. Paul Link to comment Share on other sites More sharing options...
SimonB Posted February 18, 2006 Share Posted February 18, 2006 Yep another EPS here, great stuff, but expensive and a sod to handle without slicing yourself to bits or it unraveling! Link to comment Share on other sites More sharing options...
Paul Posted February 18, 2006 Share Posted February 18, 2006 Yep another EPS here, great stuff, but expensive and a sod to handle without slicing yourself to bits or it unraveling! Tart:D Yeah you are right though, wear gloves and if you can get hold of some small bolt croppers then it makes it easy. (wear eye protection too as small bits near the edge have a tendancy to 'ping' off in all directions) Link to comment Share on other sites More sharing options...
Mike B Posted February 19, 2006 Author Share Posted February 19, 2006 Thanks Guys-Perfect! Link to comment Share on other sites More sharing options...
merckx Posted February 19, 2006 Share Posted February 19, 2006 Wish I could get the mesh and front end to look like this xkr Jag. Don't think it would be easy. Link to comment Share on other sites More sharing options...
SimonB Posted February 19, 2006 Share Posted February 19, 2006 Wish I could get the mesh and front end to look like this xkr Jag. Don't think it would be easy. That's the mesh that EPS sells! Link to comment Share on other sites More sharing options...
b_have Posted February 19, 2006 Share Posted February 19, 2006 Got mine from Ralliart years ago (stainless wire mesh) cost about £70 Link to comment Share on other sites More sharing options...
RobSheffield Posted February 20, 2006 Share Posted February 20, 2006 go to Staples, buy a Stainless steel waste paper basket, cut the bottom off - bingo - cost = £2.99 Link to comment Share on other sites More sharing options...
psymon Posted February 20, 2006 Share Posted February 20, 2006 Guys, where can i get quality black mesh, stainless does not go with the colour scheme of the car, i need black..... All am i doomed to el cheapo stuff Link to comment Share on other sites More sharing options...
nickyboy Posted April 28, 2006 Share Posted April 28, 2006 Anyone know what size mesh is required for most AM bumpers? Link to comment Share on other sites More sharing options...
Rayman Posted April 28, 2006 Share Posted April 28, 2006 Guys, where can i get quality black mesh, stainless does not go with the colour scheme of the car, i need black..... All am i doomed to el cheapo stuff Try here:- http://www.needforspeed.co.uk/pages/sbv_pl.asp?Vehicle=UV___01&PartType=MES02 Its more than likely cheap stuff but its available in black. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now