Kev.O Posted February 18, 2006 Share Posted February 18, 2006 Just wondering if I can simply swap my HKS mushroom end to something a little more useful ie apexi. Can I just swap the ends or will I have to buy the metal piece aswell. Only asking as mine's a UK! Link to comment Share on other sites More sharing options...
Kev.O Posted February 20, 2006 Author Share Posted February 20, 2006 Can anyone help me please! Link to comment Share on other sites More sharing options...
Jspec Germany Posted February 20, 2006 Share Posted February 20, 2006 I don't know the answer dude, but I'd like to know also. I am stuck between building a heatshield with the apexi cone filter attached to my current HKS piping enclosed to prevent hot air from being sucked in or trying to go back to the stock airbox. Link to comment Share on other sites More sharing options...
Dragonball Posted February 20, 2006 Share Posted February 20, 2006 The Apexi - if bought supra specific (and not just the generic filter and / or ebay crap) will come with a metal fitting kit This will replace the HKS mushroom... Link to comment Share on other sites More sharing options...
Dragonball Posted February 20, 2006 Share Posted February 20, 2006 http://miami-gt.com/images/Stainless_Steel_induction_Shielding_MGT.jpg My heatshields available here http://miami-gt.com/product_info.php/cPath/100_1_4/products_id/312?osCsid=bb98db397bba803c97693b85d2fe93cf Link to comment Share on other sites More sharing options...
colsoop Posted February 20, 2006 Share Posted February 20, 2006 Having had a mushroom in the past and an apexi induction as well, you will need the metal pipe to fit the apexi filter. Link to comment Share on other sites More sharing options...
JohnK Posted February 20, 2006 Share Posted February 20, 2006 Have you tested the temps either side of that heatshield? Link to comment Share on other sites More sharing options...
dan4 Posted February 20, 2006 Share Posted February 20, 2006 what is wrong with the mushroom?! Link to comment Share on other sites More sharing options...
JohnK Posted February 20, 2006 Share Posted February 20, 2006 what is wrong with the mushroom?! You may as well use just the metal mesh as a filter, infact that is probably what is doing most of the filtering. Link to comment Share on other sites More sharing options...
dan4 Posted February 20, 2006 Share Posted February 20, 2006 must have been doin its job on my Four as when i cleaned it all kinds of crap came out. All of the filters let more crap through than the standard filter...stands to reason as there is more air flow.....??? Link to comment Share on other sites More sharing options...
Steve Posted February 20, 2006 Share Posted February 20, 2006 must have been doin its job on my Four as when i cleaned it all kinds of crap came out. All of the filters let more crap through than the standard filter...stands to reason as there is more air flow.....??? Have a look at these tests mate: Clicky Clicky Link to comment Share on other sites More sharing options...
Dragonball Posted February 20, 2006 Share Posted February 20, 2006 Have you tested the temps either side of that heatshield? It really made a difference for heatsoak last dyno I did with it on.... Cos very heavy etc...but no figures Link to comment Share on other sites More sharing options...
Kev.O Posted February 20, 2006 Author Share Posted February 20, 2006 The Apexi - if bought supra specific (and not just the generic filter and / or ebay crap) will come with a metal fitting kit This will replace the HKS mushroom... So does anyone do the Apexi for a UK supra? Link to comment Share on other sites More sharing options...
jamesmark Posted February 20, 2006 Share Posted February 20, 2006 i had a j spec trust mushroom and fitted an apexi straight on no probs Link to comment Share on other sites More sharing options...
jaymdee Posted February 21, 2006 Share Posted February 21, 2006 So does anyone do the Apexi for a UK supra? Hi Kev, The Apexi I sold on Ebay a while ago had 2 sets of fittings which bolted onto the Apexi metal pipe. I assumed this was to allow it to fit to non-Apexi hard pipes. Does the HKS pipe finish in a flanged type end with fitting holes? Jon Link to comment Share on other sites More sharing options...
colsoop Posted February 21, 2006 Share Posted February 21, 2006 Hi Kev, The Apexi I sold on Ebay a while ago had 2 sets of fittings which bolted onto the Apexi metal pipe. I assumed this was to allow it to fit to non-Apexi hard pipes. Does the HKS pipe finish in a flanged type end with fitting holes? Jon From memory the Hks is an open pipe with a piece of silicone hose to attach it to the filter. Link to comment Share on other sites More sharing options...
Supra-Dupra Posted February 23, 2006 Share Posted February 23, 2006 Is the Blitz Sus Filter, any good ? its on that same page ! Linky here Link to comment Share on other sites More sharing options...
JohnA Posted February 23, 2006 Share Posted February 23, 2006 You'll also notice that Filtration is not inversely proportional to Airflow, as they would like to have you believe. They all make the same power 'gains' (13-14bhp) despite the pitiful filtration of some. Those 'gains' are purely from the elimination of the airbox, NOT the 'advanced technology' element. That very airbox that will stop heatsoak in real-life conditions. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now