Jonny5 Posted February 12, 2006 Share Posted February 12, 2006 I'm going to wire up an apexi SAFC 2 as an addition to the HKS VPC already fitted, mainly to gain better control of the fueling. Do I use the signal from the VPC that would normally feed the HKS GCC unit? Or do I break the map sensor signal going to the VPC and redirect this to the SAFC then back to the VPC? Can anyone help.. Quote Link to comment Share on other sites More sharing options...
LeeT Posted February 12, 2006 Share Posted February 12, 2006 the safc should be fitted on the output wire of the VPC Quote Link to comment Share on other sites More sharing options...
Jonny5 Posted February 12, 2006 Author Share Posted February 12, 2006 cheers Leett... so just to confirm lol the yellow wire from the VPC that goes to the ECU will go to the input (white wire) on the SAFC, then (yellow wire) from SAFC back to ECU. fingers crossed.. Quote Link to comment Share on other sites More sharing options...
LeeT Posted February 12, 2006 Share Posted February 12, 2006 cheers Leett... so just to confirm lol the yellow wire from the VPC that goes to the ECU will go to the input (white wire) on the SAFC, then (yellow wire) from SAFC back to ECU. fingers crossed.. yep, yellow wire into safc then output wire back to ECU Quote Link to comment Share on other sites More sharing options...
Jonny5 Posted February 12, 2006 Author Share Posted February 12, 2006 sorted cheers M8:thanku: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.