DannoSupra Posted February 9, 2006 Share Posted February 9, 2006 I had my Air box, intercooler pipe, intake pipe off today to try and have a look at taking my radiator shround off. After putting everything back on. my 2nd turbo isnt working, i'm getting 0.9Bar off Tubby #1, but after 4k rpm it's flat! Any help or Advice please... Cheers Quote Link to comment Share on other sites More sharing options...
Robert Posted February 9, 2006 Share Posted February 9, 2006 maybe a loose hose? double check Quote Link to comment Share on other sites More sharing options...
TLicense Posted February 9, 2006 Share Posted February 9, 2006 Jubilee clips not on tight enough? Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted February 9, 2006 Author Share Posted February 9, 2006 i'll have to have a look in the morning, i cant see it being a Boost prob because im getting boost off the 1st turbo. i didn't take any other hoses off only the one going into the inter cooler and the intake pipe... Quote Link to comment Share on other sites More sharing options...
letmeshowyou Posted February 9, 2006 Share Posted February 9, 2006 check all your vsv hoses. sounds like you may have disturbed one of those. Quote Link to comment Share on other sites More sharing options...
Pig Posted February 9, 2006 Share Posted February 9, 2006 If you have no luck ones you have checked all the hoses. Please describe EXACTLY what happens. or does this happen every time? in which case it will almost def be a hose! Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted February 9, 2006 Author Share Posted February 9, 2006 + i got an apexi AVC-R all plumbed in.. but it was ok before i took all the pipework off... i'll give you a shout 2morrow if i find anything. is there anything good on tv tonight? Quote Link to comment Share on other sites More sharing options...
Ian C Posted February 10, 2006 Share Posted February 10, 2006 See if you've disturbed anything described here My money is on the small hose down below that goes to the exhaust gas control valve -Ian Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted February 10, 2006 Author Share Posted February 10, 2006 SORTED!! It was the little pipe that goes along the rail back to the actuator that opens the passage from the 2nd turbo. DOH! stupid. i must have poped it off when i removed the intake pipe... Cheers for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.