Supra-Dupra Posted February 6, 2006 Share Posted February 6, 2006 Have just fitted the walbro today, then cut the power to the ECU for 30 secs(removed the fuse) , then when I took it for a spin, there was no power it was the same responce that I got as when the IC pipes disconnected ! Revs up tubbies come on just no power maxed at 30mph !! It got too dark to finish it, but tomorrow Im going to put the original pump back in and take it for a spin again, see what happens ! Anyone got any ideas ?? I did check the IC pipes again Quote Link to comment Share on other sites More sharing options...
Supra-Dupra Posted February 7, 2006 Author Share Posted February 7, 2006 Right, I took it for another drive today before removing it, a very loud sucking noise from the induction kit (blitz stainless steel one) almost twice asloud as before I had the pump fitted, it swayed me from putting the boot down last night, but today I gave it a BIT of welly and the tubbies did kick in but the noise from the induction kit is well annoyingly loud so I backed off ! Im still going to go ahead and put the original back in and see if it returns to normal !! Any comments/Idea's ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.