Jump to content
The mkiv Supra Owners Club

New lights


sooper-supra

Recommended Posts

The front bumper needs taking off ! i need to get the front indicators fitted plus the side reapeaters so therefore i do not have the time to do this that is why are doing it!

Ah, fair enough.

Are for going for facelift side indicators within the bumper?

Link to comment
Share on other sites

Blimey thats cheap

 

will j spec bulb holders etc fit?

 

52

 

High beam bulbs will fit with a bit of jiggery pokery, the j-spec low beam bulbs will need replacing as they have a slightly narrower body, so will not seal onto the headlight properly.

Link to comment
Share on other sites

Yes mate lol

So you're having the wing ones filled?

Not many people bother with a proper facelift conversion. :respekt: I love the rear side markers on mine when the lights are on. Make you look different to nearly all other cars on the road.

Link to comment
Share on other sites

So you're having the wing ones filled?

Not many people bother with a proper facelift conversion. :respekt: I love the rear side markers on mine when the lights are on. Make you look different to nearly all other cars on the road.

 

 

Hope fully depending on funds if not just clear indicators

Link to comment
Share on other sites

I should have asked this earlier, but are these pre-facelift headlights?

 

And Nic, are you saying a J-Spec would require a UK-Spec low-beam bulb & holder (probably not the technical term for the thing that holds the bulb in place)?

 

Cheers

Simon

Link to comment
Share on other sites

I should have asked this earlier, but are these pre-facelift headlights?

 

Yes they are the headlights that were fitted to the UK cars, which were all pre-facelift models, they have chrome inners the same as the Jap spec ones, although they have glass lenses rather than plastic.

 

And Nic, are you saying a J-Spec would require a UK-Spec low-beam bulb & holder (probably not the technical term for the thing that holds the bulb in place)?

 

You just need new 9006 (HB4) bulbs for the low beam (and ideally 9005 (HB3) bulbs for the high beam, although the j-spec ones can be made to fit).

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.