far Posted August 3, 2003 Share Posted August 3, 2003 Hello people, RLTC is with my importers tech guy,he is fitting it before I pick the car up.Was reading on the website once fitted the LED should flash in accordance to the RPM,how do I make sure that the RL unit has been fitted correctly and is working(and they have done the calibration test) it doesnt seem to be that clear on the instructions(or Iam being thick) - does the LED flash in a certain pattern ? Link to comment Share on other sites More sharing options...
far Posted August 4, 2003 Author Share Posted August 4, 2003 Anybody ? Termy ? Link to comment Share on other sites More sharing options...
pulse Posted August 4, 2003 Share Posted August 4, 2003 I don't have RLTC, but I'd assume the lights on the dash (Slip Cont active) should only flash while it's actually.. active? Ie, wheels spinning. Standard TC flashes a green "Slip Cont" on the dash when it's 'helping' you. I'd imagine it would also be the same as stock, whereby if you turn it off the "Slip Cont Off" comes up in orange on the dash.. Or is there another LED supplied with RLTC? -p Link to comment Share on other sites More sharing options...
far Posted August 4, 2003 Author Share Posted August 4, 2003 Or is there another LED supplied with RLTC? Cheers pulse dude - but the RLTC has an LED all of its own and thats the flashes which I am talking about... wheres Termy when I need him ! ....probably off fighting TX again Link to comment Share on other sites More sharing options...
Terminator Posted August 4, 2003 Share Posted August 4, 2003 It is all writtenin the RL manual. I can't remember all the info but you get flashes on the green bulb for each wheel by turning the controler from wet through dry, 10% and 15% That leaves 20% which is RPM, I may have got the swithch postions muddled here. Flashes increase with speed or RPM. Once working it is not something I look at. I tend to use a lap top to monitor functions now. Link to comment Share on other sites More sharing options...
far Posted August 4, 2003 Author Share Posted August 4, 2003 Cheers once again Term - must have totally missed this in the manual Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now