dandan Posted July 22, 2003 Share Posted July 22, 2003 Hi all, I've searched for this and looked in the specific setting section but not found exactly what i'm after. The previous owner had the DSBC installed but disconnected the display/controls and the solenoids and fitted a bleed valve as his tuners didn't like the ebc. All the parts are still in place just not connected. The display works fine when connected, i now need to plumb in the solenoids and begin some testing. What i need to know is, where do the "in" and "out" pipes go to from the solenoid. Can anyone show me a photo or describe the location to me. The solenoids have pipe on which is fairly long, so i'm guessing that they head for the actuator on the front turbo. Please help anyone if you can........thanks Quote Link to comment Share on other sites More sharing options...
GavinL Posted July 22, 2003 Share Posted July 22, 2003 try the tech articles on http://www.mkiv.com Quote Link to comment Share on other sites More sharing options...
dandan Posted July 23, 2003 Author Share Posted July 23, 2003 does anyone know where i should connect the pipes from the solenoid pack? please help?? ps cheers for that site gavin very very useful for actual operation Quote Link to comment Share on other sites More sharing options...
JamesG Posted July 23, 2003 Share Posted July 23, 2003 The actual installation instructions are definitely there. In fact, here: http://www.mkiv.com/techarticles/blitz_dsbc/index.html James. Quote Link to comment Share on other sites More sharing options...
dandan Posted July 24, 2003 Author Share Posted July 24, 2003 thanks james and gavin, i must admit i didn't look properly at mkiv.com as i got bogged down reading through the set up stuff else where thanks again all Quote Link to comment Share on other sites More sharing options...
X13mgr Posted October 5, 2015 Share Posted October 5, 2015 Hi trying to find the installation instructions for this boost controller but when I click on the links it says website coming soon rubbish? Has anyone got a photo of where the two in and out pipes from the solenoid T into. Quote Link to comment Share on other sites More sharing options...
Mk4Gaz Posted October 6, 2015 Share Posted October 6, 2015 Wow, this thread is older than my children's ages combined! Have you tried searching, because a quick search on Google revealed a plethora of information for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.