Need4Speed Posted June 6, 2003 Share Posted June 6, 2003 2 questions before I start. Can anybody tell me the socket size for the infamous crank bolt and is it RH or LH thread? Quote Link to comment Share on other sites More sharing options...
dude Posted June 7, 2003 Share Posted June 7, 2003 I believe it is 22mm and right handed , good luck but dont forget the old starter trick just remember to disconnect the ignitor first. John:flame Dev Quote Link to comment Share on other sites More sharing options...
Terminator Posted June 7, 2003 Share Posted June 7, 2003 That thing is torqued to 239ft-lbf:eek: Quote Link to comment Share on other sites More sharing options...
mos Posted June 7, 2003 Share Posted June 7, 2003 I made my own tool for undoing the crank bolt, its a y shaped piece of metal with 8mm bolt holes in the end that fit the holes on the crank pulley. The y shape allows you to get the socket on the bolt to undo. In the end i just got the tool from toyota but if anybody wants a picture of the tool i made or info on how to do it then pm me. Quote Link to comment Share on other sites More sharing options...
Need4Speed Posted June 7, 2003 Author Share Posted June 7, 2003 Cheers guys Quote Link to comment Share on other sites More sharing options...
Supra Pilot Posted June 7, 2003 Share Posted June 7, 2003 GOOD LUCK! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.