SUPRA4EVA Posted January 31 Share Posted January 31 Trying to track down some mirror plugs (M/F) but I don't know the p/n or if they still make them. Is there a list of all the plugs used on the car? Quote Link to comment Share on other sites More sharing options...
mc92 Posted January 31 Share Posted January 31 http://shoarmateam.nl/upload/MKIVSupra/Supra-MKIV-Repair-Manual/Wire Harness.pdf Should be in there somewhere. 1 Quote Link to comment Share on other sites More sharing options...
SUPRA4EVA Posted February 1 Author Share Posted February 1 11 hours ago, mc92 said: http://shoarmateam.nl/upload/MKIVSupra/Supra-MKIV-Repair-Manual/Wire Harness.pdf Should be in there somewhere. This is exactly what I was looking for Parts catalog only has a dozen or so in it, so was wondering where they were hiding the rest! Thanks Quote Link to comment Share on other sites More sharing options...
jagman Posted February 1 Share Posted February 1 90980-11182 is the OE 5 pin connector but not all pins used on some cars ( depends if folding or not ) I use a molex connector - you can get a box of connectors and pins - 2/4/5/6/8/10 pins male and female with about 200 pins and sockets for about £15 , so plenty of spares for future use - pins are also fitted with a pair of pliers ,no crimp tools needed -I add the smallest tad of solder . These also fit the ganador pins connector Quote Link to comment Share on other sites More sharing options...
jagman Posted February 1 Share Posted February 1 Molex 2.54 pin pitch connector Quote Link to comment Share on other sites More sharing options...
SUPRA4EVA Posted February 16 Author Share Posted February 16 Hmm didn't see this post...molex as in the old skool pc fan plug? Well I got the 5 pin male plug with my retract mirrors and I assume my UK mirror/loom will also be 5 pin plugs with 3 wires...or I can re pin it if it's a 9 pin plug, which I doubt. So I just need the 82998-12650 female repair wire type 1.3. Trouble is they cost like £50 for 1 strand and i need 4 for the retract motors!! F that! Is there an alternative or aftermarket number for those female terminals? There is also a hole plug 90980–09414 but it's discontinued. Quote Link to comment Share on other sites More sharing options...
jagman Posted February 16 Share Posted February 16 https://www.switchelectronics.co.uk/products/5-way-straight-pcb-crimp-housing-2-54mm?currency=GBP&variant=45606348554549&utm_source=google&utm_medium=cpc&utm_campaign=Google Shopping&stkn=bbf1d20e1ed7&gad_source=1&gbraid=0AAAAAqEgT0Abwtc4Pn-nx2eEQMtjf6S9v&gclid=EAIaIQobChMIutGUn6bIiwMVK5JQBh3O5ydpEAQYBSABEgJRfPD_BwE the mirror has a 5 pin connector - male pins ,by convention all connectors that have power are female , and all connectors that are powered are male …this is to prevent short circuits by 2 male pins touching .the stock connectors have slots - orientation to stop cross connections to a wrong plug . The pin spacing is 2.54 mm between pins . The molex has the correct spacing but no orientation - it should just push in . I am not sure what your issue is - a damaged connector ? Pins are also available a few hundred female pins for maybe a pound , these can be fitted with pliers /side cutters so no crimping tool needed …correct tool is over £300 . You can also just replace both connectors - extend the looms to for ease of fitment . I don’t know what your issue is the ganador mirrors dont come with OEM connector - they have a circuit board with the 5 pins on top - all open ,but they do connect to OEM door loom connector - much like molex connector - Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.