jagman Posted November 10 Author Share Posted November 10 Side skirts are a weird fit , externally they are fine , but they are lower than the floor pan by about 1 1/2 inches or so and leave a weird gap . They have a rectangular cut out front and rear , for access to the jacking points . Even weirder as no jacks have rectangular pads , and a jack has to clear the skirt lower edge . so I have materials to close the gap and seal it , there is a nice factory straight edge seam weld to follow and then bond in 4 rubber jack pad adaptors permanently to the floor ,hopefully this should stop the knob ends at tyre places who seem to love buckling factory seams by jacking on them !! Pics when done ! Quote Link to comment Share on other sites More sharing options...
jagman Posted November 11 Author Share Posted November 11 Started on the front today , cleaning and checking - all good , fitted new shock , removed the callipers for overhaul and painting - new arch liners arrived awaiting clipnuts . Closed up the gap on the side skirt lower edge Quote Link to comment Share on other sites More sharing options...
jagman Posted Monday at 05:32 PM Author Share Posted Monday at 05:32 PM Boot carpet has the matching edging in leather but is the wrong previous colour for my car - so next up is to dye it in black to match my interior ie all cream and black . But I have also found a boot mat to go over the original in cream leatherette . So I will have two boot mats . Rear fog light arrived to go in the trial rear lower , it also has reversing lights ,brake light and indicators that strobe . I got it because it’s well suited to the angle the rear bumper lower drops below the car , and of course you need a fog light for MOT , I don’t like using a stock light as a fog and prefer a separate light Quote Link to comment Share on other sites More sharing options...
jagman Posted Tuesday at 12:08 PM Author Share Posted Tuesday at 12:08 PM Battery arrived - got this one as it is very close to the size I need for the boot instal (I have the subwoofer in the rear and it fits width wise and can be laid flat - only 10 cm height ) 1100 amps (5sec) 500 cca amps despite its size still 45 AH . handy having the space upfront for WI tank /pump and power at the rear for charge cooler pump /fuel pumps and tein EDFC - no spare wheel so space in the wheel well . fitting and wiring tomorrow- windscreen and rear screens in today . managed to find a rear arch liner (mission impossible ) fronts are easy to get - fabricating my own LH rear liner Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.