RobSheffield Posted October 17, 2005 Share Posted October 17, 2005 my Greddy 2 Fow FMIC pipework is pushing the plastic inner wheelarch liner onto the tyre its the offside tyre.....the pipe that goes turbo outlet to FMIC anyone had similar problems, and if so, what did you do? Quote Link to comment Share on other sites More sharing options...
supRo Posted October 18, 2005 Share Posted October 18, 2005 I have the same FMIC, no problems. Only thing I can suggest is removing the pipework and re-fitting. Maybe the pipes are at an awkward angle??? Quote Link to comment Share on other sites More sharing options...
Dragonball Posted October 18, 2005 Share Posted October 18, 2005 You may need to cut the arch liner? Otherwise may be a question of refitting the silicon? Quote Link to comment Share on other sites More sharing options...
supRo Posted October 18, 2005 Share Posted October 18, 2005 If you mean the bottom of the arch liner, where it meets the bumper, then as Paul has said - you probably will need to cut a bit off. Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted October 18, 2005 Author Share Posted October 18, 2005 no - its mid way up, on the front section Slow suggested rejigging the pipework a bit via the silicon bits Quote Link to comment Share on other sites More sharing options...
supRo Posted October 18, 2005 Share Posted October 18, 2005 Yes, try moving the pipes around as turning them will change angles quite a bit. Also check the top IC pipe (nearest to turbo) is pushed in as far as it will go so there's more play for the pipe that goes into the wing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.