steve spedd Posted July 11, 2024 Share Posted July 11, 2024 Hi! No photos as it’s at the unit but have the following available for a R154 conversion with the following: • R154 Gearbox (was in working order when removed) • Used 2JZ Bell Housing (OEM Toyota), it is missing the dust cover to the access hole, but these can be bought new still. • 1JZ Flywheel (I think! required to bolt the clutch and R154 to the 2JZ) • 3+ Spec Clutch (used for about 500 miles) • Mk3 Supra Propshaft (The front half of this bolts to the original rear half of the Mk4 propshaft) • OEM Toyota Gearbox Mount with brand new Drift Motion mounting kit (required to achieve the correct angle on the propshaft) • Lengthened shifter housing to suit the Mk4 Supra transmission tunnel • New Cube Speed shifter bushings • OEM Toyota shift lever • Clutch Master Cylinder • Clutch Pedal Assembly • Manual Brake Pedal Assembly • Hard line from the clutch master cylinder to the slave cylinder Parts needed: • Flywheel bolts •Slave Cylinder • Gearbox oil as Said I have a flywheel but need to check if it’s W58 or 1JZ after £2,500 for the lot… located chesterfield, Derbyshire thanks steve 2 Link to comment Share on other sites More sharing options...
tayr Posted July 11, 2024 Share Posted July 11, 2024 Hi Steve, would be interested in this as wanting to do a manual swap Link to comment Share on other sites More sharing options...
G9RGE Posted October 19, 2024 Share Posted October 19, 2024 Hi Steve, did this sell? Link to comment Share on other sites More sharing options...
steve spedd Posted October 27, 2024 Author Share Posted October 27, 2024 No mate still sat in the garage here... Link to comment Share on other sites More sharing options...
G9RGE Posted October 28, 2024 Share Posted October 28, 2024 20 hours ago, steve spedd said: No mate still sat in the garage here... I have sent you a message Steve Link to comment Share on other sites More sharing options...
Darren M Posted January 10 Share Posted January 10 Hi Steve. Do you still have this kit. Thanks Darren. Link to comment Share on other sites More sharing options...
Robbieg1994 Posted January 11 Share Posted January 11 Just out of interest, how was the clutch to drive with? Ive got the same setup that I’m fitting soon Link to comment Share on other sites More sharing options...
steve spedd Posted January 17 Author Share Posted January 17 On 1/10/2025 at 10:38 PM, Darren M said: Hi Steve. Do you still have this kit. Thanks Darren. Yep still sat here... Link to comment Share on other sites More sharing options...
steve spedd Posted January 17 Author Share Posted January 17 On 1/11/2025 at 6:04 PM, Robbieg1994 said: Just out of interest, how was the clutch to drive with? Ive got the same setup that I’m fitting soon Absolutely fine, to be honest pretty much like stock... Link to comment Share on other sites More sharing options...
sidewaysdan Posted Sunday at 01:26 PM Share Posted Sunday at 01:26 PM What r154 box is it. Link to comment Share on other sites More sharing options...
Recommended Posts