steve spedd Posted July 11 Share Posted July 11 Hi! No photos as it’s at the unit but have the following available for a R154 conversion with the following: • R154 Gearbox (was in working order when removed) • Used 2JZ Bell Housing (OEM Toyota), it is missing the dust cover to the access hole, but these can be bought new still. • 1JZ Flywheel (I think! required to bolt the clutch and R154 to the 2JZ) • 3+ Spec Clutch (used for about 500 miles) • Mk3 Supra Propshaft (The front half of this bolts to the original rear half of the Mk4 propshaft) • OEM Toyota Gearbox Mount with brand new Drift Motion mounting kit (required to achieve the correct angle on the propshaft) • Lengthened shifter housing to suit the Mk4 Supra transmission tunnel • New Cube Speed shifter bushings • OEM Toyota shift lever • Clutch Master Cylinder • Clutch Pedal Assembly • Manual Brake Pedal Assembly • Hard line from the clutch master cylinder to the slave cylinder Parts needed: • Flywheel bolts •Slave Cylinder • Gearbox oil as Said I have a flywheel but need to check if it’s W58 or 1JZ after £2,500 for the lot… located chesterfield, Derbyshire thanks steve 2 Link to comment Share on other sites More sharing options...
tayr Posted July 11 Share Posted July 11 Hi Steve, would be interested in this as wanting to do a manual swap Link to comment Share on other sites More sharing options...
G9RGE Posted October 19 Share Posted October 19 Hi Steve, did this sell? Link to comment Share on other sites More sharing options...
steve spedd Posted October 27 Author Share Posted October 27 No mate still sat in the garage here... Link to comment Share on other sites More sharing options...
G9RGE Posted October 28 Share Posted October 28 20 hours ago, steve spedd said: No mate still sat in the garage here... I have sent you a message Steve Link to comment Share on other sites More sharing options...
Recommended Posts