Tommyg_5 Posted April 27 Share Posted April 27 Would be good to see what's going on with the car with realdash. Link g4x has a usb but I don't think the data come via it. So after some research I need a can usb analyser (which I now have) (https://forums.linkecu.com/topic/20442-g4x-ecu-with-realdash/#comment-118072) Question I have is what else do I need to connect this to the link ecu? Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted April 28 Share Posted April 28 You can use one of the CAN ports and wire in an OBD II port, I was going to do it using a tablet and the Torque app, but Im very much anti gauge now lol. Use one of those bluetooth adapter things https://forums.linkecu.com/topic/11754-obd2-question/ 1 Quote Link to comment Share on other sites More sharing options...
Tommyg_5 Posted April 28 Author Share Posted April 28 Awesome. Thanks need to get a look at the ecu. See if there is a spare can socket. If not can you use a splitter ? If you cant tell inknow very little about ecus and wiring. Want to know what I'm doing before I fry £1500 of ecu Quote Link to comment Share on other sites More sharing options...
johnny g Posted April 29 Share Posted April 29 I have RealDash running on a Pi. It's not too difficult. Get Pi4, and the PiCAN addon card through GPIO. Take a twisted pair, CAN Hi, CAN Lo from the ECU and wire in the PiCAN. RealDash will pick this up. I've run on a Raspberry Pi OS 64bit, cut down a little. Boot time is around 17 seconds from cold. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.