Andy Ven Posted November 15, 2022 Share Posted November 15, 2022 Brand new Pattern front ABS sensors. I have left and right in stock. These dont have the brackets but are plug and play. Image is of the exact sensor. Any questions just ask Thanks Andy Link to comment Share on other sites More sharing options...
rider Posted November 16, 2022 Share Posted November 16, 2022 The brackets being snap plastic clips shouldn't be that hard to 3D scan/print? Link to comment Share on other sites More sharing options...
Andy Ven Posted November 16, 2022 Author Share Posted November 16, 2022 I havnt seen any with plastic front ones? Mine are all metal brackets Link to comment Share on other sites More sharing options...
rider Posted November 17, 2022 Share Posted November 17, 2022 (edited) I just checked a spare facelift frame I have and the sensor lead does have metal clamps, seems it was just the rears that went to plastic. Shouldn't be hard to scan and print plastic clips to copy the original metal ones though. Just modify the bolt holes to snap clips or have plastic screw holes with plastic screws. Edited November 17, 2022 by rider (see edit history) Link to comment Share on other sites More sharing options...
Andy Ven Posted November 17, 2022 Author Share Posted November 17, 2022 I will probably look into somthing like this in future. For now hopefully it allows people to get ABS back if they just have a faulty sensor or damage it during removal. Link to comment Share on other sites More sharing options...
Recommended Posts