Sebastian Posted March 27, 2022 Share Posted March 27, 2022 (edited) Hello! i didn’t find what i need on search, I’m in need of complete dash wiring diagram for Series2 cluster, can someone give me a link or some pictures how its done? The speedo worked when i bought the car, And all of a sudden it stopped working, I have checked everything without making it work, The Blue/red is hooked up that it the speedsensor, I have also installed new cables direcly from the speedsensor, 12v and ground. But nothing happens.. The car has series 2 speedometers installed in a 1995 Supra, so I dont know if they have connected it in any other way.And now I need your help how to fix this. Fuel gauge,Watertemp,RPM tacho is working. * Car is JDM 1995 Mkiv 2jz GTE 6spd. Edited March 27, 2022 by Sebastian (see edit history) Quote Link to comment Share on other sites More sharing options...
Halfwalker Posted April 6, 2022 Share Posted April 6, 2022 Quote Link to comment Share on other sites More sharing options...
Halfwalker Posted April 6, 2022 Share Posted April 6, 2022 Have you verified you're getting a good signal from the speed sensor ? Check where the L-R Blue-Red wire goes into the odometer - that assembly is fragile and prone to solder cracks. I had to touch up all the solder joints on mine some years ago. Open it up carefully, dab a bit of flux on each joint and hit with a soldering iron. Also check the ribbon cable - it too is fragile. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.