Wishieftrottle Posted January 19, 2022 Share Posted January 19, 2022 I like the pre-facelift ones more. Looks smoother and go in line with design of supra body or I am just tired of look of facelift ones, because I have them on my car Quote Link to comment Share on other sites More sharing options...
mharvey Posted January 19, 2022 Share Posted January 19, 2022 9 hours ago, Chingy said: Thanks everyone, agree technically has to be the left… but do like the smooth look of the right pre facelift. 1st world supra problems right here I think you're spot on. I much prefer pre-facelift aesthetically but considering the lengths you're going to, you'll have to fit the period correct facelift ones 1 Quote Link to comment Share on other sites More sharing options...
Noodles249uk Posted January 19, 2022 Share Posted January 19, 2022 i voted for the prefacelift. i like the smoother finish on the car. OEM+ is fine but some subtle tweaks are worth it in places. either that or keep both centres for switching? Quote Link to comment Share on other sites More sharing options...
Chingy Posted January 19, 2022 Author Share Posted January 19, 2022 Done! Face Lift it is with the spare set in the glovebox for when the change takes my fancy 1 Quote Link to comment Share on other sites More sharing options...
Chingy Posted January 19, 2022 Author Share Posted January 19, 2022 (edited) Please donate tapes thank you SRD oem tape deck sourced & installed with correct oem pocket Edited January 19, 2022 by Chingy (see edit history) 5 Quote Link to comment Share on other sites More sharing options...
TuneR Posted January 20, 2022 Share Posted January 20, 2022 Ha double-D. Get the tape with the headphone connection coming out of it, connect to a Bluetooth receiver and then connect to your phone. 2 Quote Link to comment Share on other sites More sharing options...
Chingy Posted January 27, 2022 Author Share Posted January 27, 2022 Back she goes 3 Quote Link to comment Share on other sites More sharing options...
Chingy Posted January 30, 2022 Author Share Posted January 30, 2022 Seats off to Trimtech Automotive for a refresh 5 Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted January 31, 2022 Share Posted January 31, 2022 What are your plans with the seats? Quote Link to comment Share on other sites More sharing options...
tayr Posted January 31, 2022 Share Posted January 31, 2022 2 hours ago, mwilkinson said: What are your plans with the seats? Sit in them more than likely 1 2 Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted February 1, 2022 Share Posted February 1, 2022 7 hours ago, tayr said: Sit in them more than likely Very droll! 2 Quote Link to comment Share on other sites More sharing options...
Chingy Posted February 2, 2022 Author Share Posted February 2, 2022 On 1/31/2022 at 8:11 PM, mwilkinson said: What are your plans with the seats? Having one of the bolsters replaced that has collapsed and generally taken apart and anything untowards corrected have sourced fabric for the inner and outer parts if needed 1 Quote Link to comment Share on other sites More sharing options...
Ric Posted February 2, 2022 Share Posted February 2, 2022 Don't forget to get the harness plastics flocked for the none oem seat. 2 Quote Link to comment Share on other sites More sharing options...
Chingy Posted February 2, 2022 Author Share Posted February 2, 2022 5 hours ago, Ric said: Don't forget to get the harness plastics flocked for the none oem seat. Hadn’t even noticed that 1 Quote Link to comment Share on other sites More sharing options...
Shane34 Posted February 5, 2022 Share Posted February 5, 2022 Im getting my sr5 speedline fitted with heated elements. Maybe im getting old. Quote Link to comment Share on other sites More sharing options...
Chingy Posted February 5, 2022 Author Share Posted February 5, 2022 2 hours ago, Shane34 said: Im getting my sr5 speedline fitted with heated elements. Maybe im getting old. No Shane, that’s just being awesome very nice 1 Quote Link to comment Share on other sites More sharing options...
Shane34 Posted February 6, 2022 Share Posted February 6, 2022 Only £80 ill have to wire it but it comes with all the wires and switches. Getting the alcantara fabric renewed as it faded. P.s might have that vvti air box you need. 1 Quote Link to comment Share on other sites More sharing options...
Chingy Posted February 6, 2022 Author Share Posted February 6, 2022 2 hours ago, Shane34 said: Only £80 ill have to wire it but it comes with all the wires and switches. Getting the alcantara fabric renewed as it faded. P.s might have that vvti air box you need. Wow they are going to look awesome … very envious. I wonder if it would be at all possible if you are able to find an oem heater switch (I think used in the U.K. specs) and if with some witch craft it can be used with your new set up. P.s that will literally save the day for Lee & I… so much so, I would need to have your name etched against the vin plate Quote Link to comment Share on other sites More sharing options...
Tyson Posted February 6, 2022 Share Posted February 6, 2022 1 hour ago, Chingy said: Wow they are going to look awesome … very envious. I wonder if it would be at all possible if you are able to find an oem heater switch (I think used in the U.K. specs) and if with some witch craft it can be used with your new set up. P.s that will literally save the day for Lee & I… so much so, I would need to have your name etched against the vin plate Buttons are selling for silly money now and are very rare, so if you're not bothered about it being an OEM button, I would see if you could get a similarly sized one from something else or see if you get one 3D printed if you go down that route. 1 Quote Link to comment Share on other sites More sharing options...
Ric Posted February 6, 2022 Share Posted February 6, 2022 1 hour ago, Tyson said: Buttons are selling for silly money now and are very rare, so if you're not bothered about it being an OEM button, I would see if you could get a similarly sized one from something else or see if you get one 3D printed if you go down that route. I think i remember one selling in the USA for 1k just for the heated seat button. 1 Quote Link to comment Share on other sites More sharing options...
Chingy Posted February 6, 2022 Author Share Posted February 6, 2022 3 hours ago, Ric said: I think i remember one selling in the USA for 1k just for the heated seat button. Quote Link to comment Share on other sites More sharing options...
Krimi Posted February 6, 2022 Share Posted February 6, 2022 On 1/30/2022 at 9:38 PM, Chingy said: Seats off to Trimtech Automotive for a refresh Love the look of the confettis!! I doubt to do this in my seats but for my style, I go with full nappa leather!! Great interior btw! 2 Quote Link to comment Share on other sites More sharing options...
Chingy Posted February 10, 2022 Author Share Posted February 10, 2022 On 2/6/2022 at 6:10 PM, Krimi said: Love the look of the confettis!! I doubt to do this in my seats but for my style, I go with full nappa leather!! Great interior btw! Thanks buddy… also always been fond of these seats. But if I wasn’t staying stock, SR’s in full nappa leather would be lovely … very nice 1 Quote Link to comment Share on other sites More sharing options...
Tyson Posted February 12, 2022 Share Posted February 12, 2022 On 2/6/2022 at 11:52 AM, Ric said: I think i remember one selling in the USA for 1k just for the heated seat button. Madness, pure madness. Quote Link to comment Share on other sites More sharing options...
Hammer Posted February 13, 2022 Share Posted February 13, 2022 Great build and really enjoying the thread, great work with both. Lovely supra. Looking forward to seeing the end result, well done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.