keron Posted July 24, 2021 Share Posted July 24, 2021 (edited) So as ive been making / reproducing parts that have been discontinued etc from Toyota to keep these cars on the road for the last couple of years, my latest part is the front bumper reinforcer / impact bar as i get asked for a lot so decided to make a big batch of them. I was luckily enough to have the last few from Toyota, kept one back for a template as well as the factory used ones..... i actually weld all the way around unlike Toyota do on the end caps and also the ends are also curved as they are intended to be for a safety point of view and more importantly to fit properly unlike others ive seen on the market which are straight and don't fit the bumper energy absorber / bumper correctly as they are curved too so don't push in properly!..... Some pics below....to show oem / mine and the differences. All hand built and fit 100%. Cost per item is £200 plus del and i can ship anywhere in the world..... if you need one, just pm, email or call me....All payment methods accepted too. Please note, these are for off road / show use only as nobody is willing to lend me their supra to do a crash safety test on for some reason. Kind regards Keron Edited July 27, 2021 by keron (see edit history) 7 Link to comment Share on other sites More sharing options...
Tyson Posted July 27, 2021 Share Posted July 27, 2021 I have tidied the thread up at the OP's request. As this is a for sale thread can you please only comment if you intend to buy the product for sale. Keep all other conversations separate please. 6 Link to comment Share on other sites More sharing options...
Recommended Posts