TRD-1 Posted March 25, 2021 Share Posted March 25, 2021 Hi Guys, Garage clearout, brought this for my turbo project which is now sold, brought new, never been used or fitted, comes with fitting kit. Few minor scratches from storage. Dimensions approx 400mm x 260mm x 25mm In/Out Ports 10mm Price £40 Delivered Link to comment Share on other sites More sharing options...
shaz2010 Posted March 25, 2021 Share Posted March 25, 2021 Hi mate can this be used for the power steering cooler? Mine recently cracked and is leaking. Link to comment Share on other sites More sharing options...
shaz2010 Posted March 25, 2021 Share Posted March 25, 2021 Link to comment Share on other sites More sharing options...
TRD-1 Posted March 26, 2021 Author Share Posted March 26, 2021 (edited) Hi, I don't know what pressure the PAS runs at, far as I know long as your PAS cooler is on the low pressure side then it could work, but it is much bigger than what you currently have. Thanks Edited March 26, 2021 by TRD-1 (see edit history) Link to comment Share on other sites More sharing options...
7677243 Posted March 27, 2021 Share Posted March 27, 2021 Sorry to hi-jack, what size coolers are we capable of fitting behind the side vents in the stock front bumpers? After seeing your pic shaz I thought you could save me some legwork. I was after gearbox cooler on the rhs and engine oil on the lhs. Also, PM sent about a few of your parts Trd-1. Cheers. Link to comment Share on other sites More sharing options...
shaz2010 Posted March 28, 2021 Share Posted March 28, 2021 hi mate it’s not my car it’s Burna setup he posted on a wanted post I’ve put up for a pas cooler and showed me what he had done. Probs best to pm him. Link to comment Share on other sites More sharing options...
Recommended Posts