David P Posted June 12, 2014 Share Posted June 12, 2014 Soarer 1JZ-GTE installation is same as N/A Supra installation; http://www.mkivsupra.net/vbb/group.php?discussionid=82&do=discuss Soarer 1UZ-FE installation as above, except must use the 1UZ-FE bellhousing & torque-convertor. With the exception of propshaft, neil tt had a bespoke rear section made by Dave Macs Props at Coventry. http://davemacprops.co.uk/dmphome.html However, I'm sure that there are O.E. prop sections that would do the job, it/they just need identifying, Chris88 is on the case. Soarer Hybrid build thread of sorts here. http://www.mkivsupra.net/vbb/showthread.php?270287-A340-A343-Hybrid Link to comment Share on other sites More sharing options...
David P Posted February 25, 2016 Author Share Posted February 25, 2016 Chris has confirmed that the prop rear-section required is from a V8 Soarer. Thank you for your input. Link to his Soarer Hybrid build here. http://www.soarerworld.com/forum/showthread.php?32754-3-0L-NA-T-Project Link to comment Share on other sites More sharing options...
Recommended Posts