AC93 Posted June 10, 2020 Share Posted June 10, 2020 Hi all, So at my work we make custom/bespoke wiring harnessss, looms, pigtails etc. Is there something for the Supra we want back to production? Or something that's usually silly price that I could see if can be made cheaper? We are very busy at the minute and we don't do automotive products or high volume full time (i.e. 1000+), but in my spare time I can get some drawings and a bill of materials made up and get it produced on the side A.C. Link to comment Share on other sites More sharing options...
inazone Posted June 10, 2020 Share Posted June 10, 2020 Check this thread out, you could become very useful if an ABS sensor can be found. Rather than cutting the new lead to extend it, perhaps an extension can be created... https://r.tapatalk.com/shareLink/topic?url=http%3A%2F%2Fwww%2Emkivsupra%2Enet%2Fvbb%2Fshowthread%2Ephp%3Ft%3D358364&share_tid=358364&share_fid=12714&share_type=t&link_source=app Link to comment Share on other sites More sharing options...
keron Posted June 10, 2020 Share Posted June 10, 2020 i get asked a lot for prefacelift tt engine harnesses..... they are discontinued too and should sell well at the right price.... Link to comment Share on other sites More sharing options...
AC93 Posted June 10, 2020 Author Share Posted June 10, 2020 Check this thread out, you could become very useful if an ABS sensor can be found. Rather than cutting the new lead to extend it, perhaps an extension can be created... https://r.tapatalk.com/shareLink/topic?url=http%3A%2F%2Fwww%2Emkivsupra%2Enet%2Fvbb%2Fshowthread%2Ephp%3Ft%3D358364&share_tid=358364&share_fid=12714&share_type=t&link_source=app /QUOTE] That would be good if a suitable sensor can be sourced! We make and test everything in-house in Hertfordshire to aerospace specification i get asked a lot for prefacelift tt engine harnesses..... they are discontinued too and should sell well at the right price.... Yeah they are getting very rare now ..it would certainly be possible. Ideally I'd need to borrow a loom for a few days to use as a template for wire length and jotting down all the correct connectors so everything clips on like it should Link to comment Share on other sites More sharing options...
inazone Posted June 10, 2020 Share Posted June 10, 2020 If the looms were available at sensible money I wouldn't mind changing mine. I am sure there will be plenty of people who would like to change theirs... Link to comment Share on other sites More sharing options...
mr.gill Posted June 10, 2020 Share Posted June 10, 2020 Do it brother. You will be doing a lot of folks a huge favor. Honestly. Shoot, if it's the right price, I'll put a deposit for you right now. I'll pay for the shipping to the states. Just saying. Link to comment Share on other sites More sharing options...
markssupra Posted June 12, 2020 Share Posted June 12, 2020 I have a spread sheet of all the pinouts and connector part numbers of my stock 93 J spec TT Auto loom if that would help you? Took me a while with a multimeter in between getting my ear bent by the wife as it was spread out over our dining room table for a few weeks lol. I made up a brand new loom for my Syvecs install and wanted to know what I could leave out and what needed to be added, not sure if there are any differences between J spec, UK spec and US spec though apart from manual/auto. All I know is that the loom I made works on my car Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now