Thomasjones Posted May 8, 2020 Share Posted May 8, 2020 Specifically Meister S1s (18s). Have heard they can be a bit tight with big brake kits, does anyone know if they’ll fit over 330mm ksports? Thanks Tom Quote Link to comment Share on other sites More sharing options...
turnerjr Posted May 8, 2020 Share Posted May 8, 2020 Hi Tom, Ive got 18” workmeister s1r’s fitted to my car. not sure on ksports but Ive got loads of clearance on my uk brakes. All the best, John Quote Link to comment Share on other sites More sharing options...
Mo Reviews Posted May 8, 2020 Share Posted May 8, 2020 Specifically Meister S1s (18s). Have heard they can be a bit tight with big brake kits, does anyone know if they’ll fit over 330mm ksports? Thanks Tom Most clearance issues typically occur with UK callipers but it largely depends on the type of disk used on the wheels. Have a look on the driftworks website for more information. Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted May 8, 2020 Share Posted May 8, 2020 We run Work Meister S1 18x9.5J ET37 18x11.5J ET49 Had them made to suit a BBK in case we wend down that route further down the line, can’t for the life of me remember what disc option we went with though. Possibly was the “O” disc or something. Speak with Driftworks, they were really helpful with any questions I had. Just tell them the rough sizes you want etc and they should be able to guide you from there. Quote Link to comment Share on other sites More sharing options...
Delboy52 Posted May 9, 2020 Share Posted May 9, 2020 The Ksport .pdf templates which can be used to check wheel clearances. Driftworks should be able to check against the S1 wheels and whatever offset you choose. http://www.mkivsupra.net/vbb/showthread.php?352041-Ksport-Supra-Caliper-Templates Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 9, 2020 Share Posted May 9, 2020 My Work Equips had very little clearance between the spokes and front 4 pot UK spec calipers Quote Link to comment Share on other sites More sharing options...
Thomasjones Posted May 9, 2020 Author Share Posted May 9, 2020 Thanks all, currently on the original 2 pot JSpec brakes... I’ll give the guys at driftworks a call and talk in through with them. T Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.