JSpec Headlight Refurbishment Build Thread - In-Built indicator halo & Steel Rings

[Noz]

So over the past few years, I've given a few refurbs a go. The odd set we could say.

 

As I near the end of this era, I am completing what could be the last JSpec set. I thought I would document it as I go. I'm building in a custom ring for indicating, while also attaching my own fabricated steel rings.

 

I will write the thread, as a guide. So I will include as much information as I can to help someone do their own, in the future.

 

I will complete the painting myself. Typically, I used to pay my paint guy. But for those wanting to complete it on their own, I will explain how I would go about this. I will treat it as a guide.

 

I've learned a lot along the way. How to make things easy and tricks to not break fragile internals. Hopefully, as I will no longer utilise these skills I thought I would get enjoyment from sharing this and perhaps offering someone value in the future.

 

I will be selling the set after completion.

 

Here they are in their current state;

 

 

 

Here is what I hope to turn them into;

 

[Noz]

Reserved

[Noz]

Held for postings

[Therr]

Hello, I am a new member and can not pm you. How can I get in touch with you to purchase a couple sets of the headlight rings?

[Noz]

Hi there.

 

The covid situation has caused a delay on some materials. You can sign up to the forum to allow you to PM people.

 

While its advantageous to be able to message me directly. You'll also find a plethora of good information here.

 

If you apply for membership you can send me a message.

 

You've timed it well. As I only have a few sets left before I'm totally out of capability to make more. Or enthusiasm. Lol

[charlton]

Great timing on this, I’ve been looking at mine thinking I should make the most of the lockdown and freshen them up

 

A few questions it would be good to see you cover (as I haven’t yet found them in my searches)

- sand down the inserts before painting? (If chrome is flaking)

- if so, what grit/prep?

- what sealant is recommended to seal the headlight units?

- what do you suggest to bond your chrome rings to the insert?

- subjective, but any recommendation on (matte) high temp proof paint?