Wheelynutz Posted February 9, 2020 Share Posted February 9, 2020 (edited) So I’ve recently made some specialist seal installer tools for front and rear main seals for 1 and 2jz engines, after not being able to find a quick and easy to use tool with no chance of fitting the seals in too far or crooked I have decided to make and produce my own and all made in the uk from 6082 T6 aluminium billet. As some of you know, if you push the front crank seal in too far it can block the relief hole in the oil pump and will either pop the seal back out of the oil pump or leak then having to fit a new seal again, this does up against the crank fitting the seal correctly first time. And same process goes for the rear seal tool, it locates itself over the centre of the crank where the spigot bearing is located and you do it up in a circular order slowly with the stock bolts pulling the seal in evenly. The front tool works with the stock crank pulley bolt and the rear seal tool is made to work with stock v160/161 dual mass bolts. Each tool is £60 posted and I have a few of each in stock at the moment for immediate dispatch. Edited February 9, 2020 by Wheelynutz (see edit history) Link to comment Share on other sites More sharing options...
Swampy442 Posted February 9, 2020 Share Posted February 9, 2020 Really nice work man, good job Link to comment Share on other sites More sharing options...
Scooter Posted February 9, 2020 Share Posted February 9, 2020 I got one of these (front seal tool) from the op via Facebook and can confirm the quality of the item Link to comment Share on other sites More sharing options...
Mk4Gaz Posted February 9, 2020 Share Posted February 9, 2020 I'll be ordering one of these very soon [emoji1303] Link to comment Share on other sites More sharing options...
Wheelynutz Posted February 10, 2020 Author Share Posted February 10, 2020 I got one of these (front seal tool) from the op via Facebook and can confirm the quality of the item Cheers man, much appreciated I'll be ordering one of these very soon [emoji1303] /QUOTE] Just drop me a pm as and when Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
inazone Posted February 10, 2020 Share Posted February 10, 2020 Nice work. This is perfect for people who build the engine's on a regular basis, but what about the guy who wants to replace his own? Can you rent them? Link to comment Share on other sites More sharing options...
RajR34 Posted February 20, 2020 Share Posted February 20, 2020 Nice work. This is perfect for people who build the engine's on a regular basis, but what about the guy who wants to replace his own? Can you rent them? /QUOTE] I like this thought too! I’ll only ever do this once.. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Wheelynutz Posted February 25, 2020 Author Share Posted February 25, 2020 Nice work. This is perfect for people who build the engine's on a regular basis, but what about the guy who wants to replace his own? Can you rent them? /QUOTE] I like this thought too! I’ll only ever do this once.. Sent from my iPhone using Tapatalk I could rent them out if need be, would certainly help a few members out Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
inazone Posted February 25, 2020 Share Posted February 25, 2020 I could rent them out if need be, would certainly help a few members out /QUOTE]That's great! I will give you a shout when I pull my engine out to refresh it. This will definitely save me some pain when I swap out the seals. [emoji3][emoji1303] Sent from my G8142 using Tapatalk Link to comment Share on other sites More sharing options...
RajR34 Posted February 25, 2020 Share Posted February 25, 2020 I could rent them out if need be, would certainly help a few members out /QUOTE] That's great! I will give you a shout when I pull my engine out to refresh it. This will definitely save me some pain when I swap out the seals. [emoji3][emoji1303] Sent from my G8142 using Tapatalk Nice! Mine literally is ready to whack in a new seal. I’ll drop you a PM - that’s if inazone’a engine isn’t about to come out? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
inazone Posted February 25, 2020 Share Posted February 25, 2020 Go for it, I'm not going to need it for a while. Link to comment Share on other sites More sharing options...
Recommended Posts