Mike2JZ Posted February 2, 2020 Share Posted February 2, 2020 Innovate MTX-L Wideband Controller Gauge + Bosch 4.9 LSU Sensor - £90 (inc post) Link 3 Bar Map Sensor: £60 (inc post) AEM 12 Position Rotary Switches x 2 - £20 (inc post) each VPV Single Channel 0-5v Exhaust Gas Temperature Amplifier + K Type Sensor - £50 (inc post) Manual JSpec 0 - 180kph Speedo Unit (has MPH sticker on it already) - £100 (inc post) Link to comment Share on other sites More sharing options...
nolizma Posted February 2, 2020 Share Posted February 2, 2020 Hello Mike, interested in the innovate gauge and sensor. Is this the afr one? Do you know what the diameter is? Would it fit in the pre-facelift clock position? Any pics? Thanks. Link to comment Share on other sites More sharing options...
curious Posted February 2, 2020 Share Posted February 2, 2020 Pm sent. Thanks Link to comment Share on other sites More sharing options...
Andy Ven Posted February 4, 2020 Share Posted February 4, 2020 Pmd Link to comment Share on other sites More sharing options...
Mike2JZ Posted February 4, 2020 Author Share Posted February 4, 2020 All sensors sold now, only speedo left Link to comment Share on other sites More sharing options...
maximuskey Posted February 4, 2020 Share Posted February 4, 2020 All sensors sold now, only speedo left Do you have any pics of the speedo? Are you referring to the entire gauge cluster? thanks Link to comment Share on other sites More sharing options...
Mike2JZ Posted February 4, 2020 Author Share Posted February 4, 2020 Do you have any pics of the speedo? Are you referring to the entire gauge cluster? thanks Haven't got one on me, but looks like this: Just the speedo unit, not the gauge cluster. Link to comment Share on other sites More sharing options...
maximuskey Posted February 4, 2020 Share Posted February 4, 2020 Ok, I'm looking for an entire cluster, or at least the circuit board on the back. Thanks though, good luck. Link to comment Share on other sites More sharing options...
Recommended Posts