jackso11 Posted February 1, 2020 Share Posted February 1, 2020 (edited) My old block. I have had it in the garage for a couple of years, the people that swapped it out for another block said it was badly scored and can’t be repaired and to be honest I never looked. I had always though at some point I would try and get it repaired, sleeved or something and build I high hp engine. As the years go on inhale decided it’s just in the way so want it gone so has a look and there is no scoring, just a flat spot on the lip of the bore where the bent condos hit it (probably wasn’t bent before it hit!). What do you think people? Scrap? Or can I sell this. Crank is all good and 5 pistons are fine. Second image is obviously what it should look like. Edited February 1, 2020 by jackso11 (see edit history) Link to comment Share on other sites More sharing options...
Andy Ven Posted February 1, 2020 Share Posted February 1, 2020 Its worth checking with a bore mic to see if it has crushed the bore in. If it has then it all depends on by how much. Also if it looks to have any fracture marks then thats a sign that its done for Link to comment Share on other sites More sharing options...
jackso11 Posted February 1, 2020 Author Share Posted February 1, 2020 I really can’t be bothered to lug it around. I was hoping someone would say ‘easy to fix’. I think probably best to just sell the crank and pistons, block comes free and if whoever buys it can get it fixed then they have a bonus. Link to comment Share on other sites More sharing options...
drift_bear Posted February 2, 2020 Share Posted February 2, 2020 If you’re wanting to sell it I’ll but it if the price is right, I’m just needing it so I can turn it into a table [emoji2371] Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now