AristoA Posted August 26, 2019 Share Posted August 26, 2019 I have had the MKIV OEM footwell lighting harness for years, but have never installed it. I do know that it plugs into the illuminated ignition key ring, but I am unsure as to where the two lights actually mount. Can someone who has a JDM car with this option look to see where this lighting was originally mounted to (using adhesive) under the dash? Many thanks. Quote Link to comment Share on other sites More sharing options...
Ric Posted August 27, 2019 Share Posted August 27, 2019 I have mine stuck to the air vent tubing which is the only flat area in those positions Quote Link to comment Share on other sites More sharing options...
AristoA Posted August 31, 2019 Author Share Posted August 31, 2019 Was yours a JDM import that had these already installed, or did you add them yourself? I would very much like to see a cell phone picture of the light locations from a car that came with these from Toyota (I know this might be asking a lot). Thanks. Quote Link to comment Share on other sites More sharing options...
AndyJax Posted September 4, 2019 Share Posted September 4, 2019 I'd love to have the OEM part number of these foot well lights as well.There is a serial number on the actual lens,but my parts Man at the local Toyota garage can't seem to find anything. Quote Link to comment Share on other sites More sharing options...
AristoA Posted May 23, 2021 Author Share Posted May 23, 2021 Bumping this up as I still have been unable to find a picture of the mounting locations for these. Ric seem correct in that, at least on the driver's side, the only flat area to mount these is on the plastic ventilation duct. Also, does anyone know what adhesive is used to mount these? Is it simply double-sided tape? Quote Link to comment Share on other sites More sharing options...
Frank Bullitt Posted May 23, 2021 Share Posted May 23, 2021 One fits to heater box on the passenger side and the other to air duct on the drivers side. A clear double sided tape will hold them perfectly. Something like - https://www.amazon.co.uk/Gorilla-Glue-3044101-Heavy-Duty-Mounting/dp/B01FMXKIOM/ref=sr_1_3_sspa?crid=WQ8G34QACF0O&dchild=1&keywords=double+sided+sticking+tape&qid=1621765487&sprefix=Doublesid%2Caps%2C184&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFUMDA2VkNTR0FQR1omZW5jcnlwdGVkSWQ9QTAzMDk1MDcxTFRQRlIwVzJQN00mZW5jcnlwdGVkQWRJZD1BMDg4NTEzMDFVUTlGSE9DUEswMlQmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl 1 Quote Link to comment Share on other sites More sharing options...
Frank Bullitt Posted May 23, 2021 Share Posted May 23, 2021 If you want to “upgrade” the bulbs to LED you want the t5 286 bulb, make sure each side of the push in flat blade only has one metal contact otherwise you will blow the inline fuse. Quote Link to comment Share on other sites More sharing options...
AristoA Posted May 24, 2021 Author Share Posted May 24, 2021 (edited) Big thanks, Frank. Good advice to people on the manner of insertion of a (74, t5 286) LED bulb. During the process of installing the bulbs, which I was doing incorrectly turned at 90 degrees, I foolishly jumped the fuse and burned out my integration relay, which is a bit of a pain to replace. Another tip in going with LED bulbs is to get ones that have the wire-like contacts, rather than those with the contacts on the PCB, as the latter ones I tried were too thick insert into the loom plugs. Edited May 24, 2021 by AristoA (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.