fastphil666 Posted August 24, 2019 Share Posted August 24, 2019 Good evening folks, could anyone measure the placent of the toyota emblem and supra badge? I've just bought them off whifbitz and would like to place them in the correct-ish place. [COOL][/COOL] Quote Link to comment Share on other sites More sharing options...
Darren M Posted August 25, 2019 Share Posted August 25, 2019 Toyota emblem is 20mm up from bottom edge of tailgate to bottom of the oval and central obviously. The Supra logo is 22mm up from bottom edge of tailgate to bottom of the letters. The tail of the P hangs lower. The logo starts 250mm from the bottom right corner of the tailgate. Hope this makes sense. Cheers Darren. Quote Link to comment Share on other sites More sharing options...
rider Posted August 25, 2019 Share Posted August 25, 2019 The Toyota emblem if OEM should have three mounting pins so the position is the position, the front emblem has two. If the emblem is not an original and just a sticky then the two level holes sit at the end of the horns. For the Supra part it depends if you are adding the non JDM 'turbo' badge. There are a ruck of photos online but the 'p' is about 3cm along from the edge of the outer brake light lens. If you are adding the optional 'turbo' badge then you'll need to move the Supra badge way over to the left. My car still has its OEM optional (from the 1996 options brochure) gold outline Supra badge so you'd have to assume its exactly where it was originally intended to be. Quote Link to comment Share on other sites More sharing options...
Wishieftrottle Posted August 26, 2019 Share Posted August 26, 2019 (edited) This could help a little. I will be back in garage next weekend for exact measurement, I guess it is too late :-) Edited August 26, 2019 by Wishieftrottle update of information (see edit history) Quote Link to comment Share on other sites More sharing options...
fastphil666 Posted August 27, 2019 Author Share Posted August 27, 2019 Thanks guys, still waiting on the arrival of the badges but the measurements should help. The car has a smoothed tailgat but i feel its missing something. Also if its an original emblem i'll have to cut the locating pins off. Quote Link to comment Share on other sites More sharing options...
David P Posted August 27, 2019 Share Posted August 27, 2019 The car has a smoothed tailgat but i feel its missing something. Quote Of The Week? Quote Link to comment Share on other sites More sharing options...
fastphil666 Posted August 27, 2019 Author Share Posted August 27, 2019 Yeah, reading it back that makes no sense. I bought the car with a smoothed *tailgate* However to my eyes i think it needs something to break it up. Also would like to do something other than carbon fibre for the trd spoiler end caps? Quote Link to comment Share on other sites More sharing options...
fastphil666 Posted August 29, 2019 Author Share Posted August 29, 2019 Received the badges from whifbitz today, fast delivery too. So yeah they are oem badges, so i will need to remove the pins on the toyota badge. I will fit them this weekend using the dimensions given, thanks again Quote Link to comment Share on other sites More sharing options...
Wishieftrottle Posted August 30, 2019 Share Posted August 30, 2019 7 Quote Link to comment Share on other sites More sharing options...
fastphil666 Posted August 30, 2019 Author Share Posted August 30, 2019 Thanks a lot thats great Quote Link to comment Share on other sites More sharing options...
fastphil666 Posted September 7, 2019 Author Share Posted September 7, 2019 Thanks for the help guys Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.73ccfc5494847f4669d8942f4b7415ae.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.