safcdixon Posted August 17, 2019 Share Posted August 17, 2019 Hey guys, I am looking at refitting my Oem skirts back onto the car after Ive painted the sills and undersealed the car, issue is i took them off over a year ago and have misplaced the bolts/screws Does anyone happen to know the size/length/pitch of them? Looking at replacing with stainless ones too as iirc they were a little crispy on removal Thanks, Marc Quote Link to comment Share on other sites More sharing options...
safcdixon Posted August 18, 2019 Author Share Posted August 18, 2019 Anyone? Im after the ones that bolt the skirt to the underside of the sill/floor Quote Link to comment Share on other sites More sharing options...
mc92 Posted August 18, 2019 Share Posted August 18, 2019 From memory they're some kind of odd metric size between no.10 and no.12. I think I used stainless roofing screws on mine. I could be wrong it was a while ago. Found this diagram on googling the part no.90159-50316 so that might help you if we're talking about the same screws. Quote Link to comment Share on other sites More sharing options...
safcdixon Posted August 18, 2019 Author Share Posted August 18, 2019 From memory they're some kind of odd metric size between no.10 and no.12. I think I used stainless roofing screws on mine. I could be wrong it was a while ago. Found this diagram on googling the part no.90159-50316 so that might help you if we're talking about the same screws. [ATTACH=CONFIG]233018[/ATTACH] Awesome thanks for that dude, points me in the right direction, big help Quote Link to comment Share on other sites More sharing options...
Style Posted August 19, 2019 Share Posted August 19, 2019 I think I've got a bag in my garage somewhere that has a lot of underside fixings in it. Can have a look for them if it's any use dude? Quote Link to comment Share on other sites More sharing options...
kslb Posted August 19, 2019 Share Posted August 19, 2019 They do look like the 8mm hex head roofing fixings. Quote Link to comment Share on other sites More sharing options...
ChrisH Posted August 19, 2019 Share Posted August 19, 2019 When I swapped mine over I replaced all the original screws with 12g x 5/8" plated hex head self tapping screws then I used M5 stainless nut & bolts to replace the rear 2 screws on each Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.