shervin_ice Posted July 21, 2019 Share Posted July 21, 2019 Hi all As above I’m planning to do r154 swap and wondering if I can use my auto box bell housing bolts to engine or do I have to use different bolts? Thanks in advance Shervin Quote Link to comment Share on other sites More sharing options...
Noz Posted July 21, 2019 Share Posted July 21, 2019 Bolts should be the same. Engine determines the bolt diameter due to predetermined thread. Measure the auto bell housing and r154 thickness on the flange against the engine. But there shouldn't be much in it I would have thought. If there is, just replicate the amount of thread depth in the engine so it's like for like. Quote Link to comment Share on other sites More sharing options...
shervin_ice Posted July 21, 2019 Author Share Posted July 21, 2019 Bolts should be the same. Engine determines the bolt diameter due to predetermined thread. Measure the auto bell housing and r154 thickness on the flange against the engine. But there shouldn't be much in it I would have thought. If there is, just replicate the amount of thread depth in the engine so it's like for like. Thanks Noz [emoji106] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.