adi2009 Posted July 17, 2019 Share Posted July 17, 2019 Hi guys, I see a lot of people using Mahle pistons here. I also read that the Mahle's have minimal piston slap which I would prefer. However, I was explicitly told by a vendor from the US that I should use Manley or CP instead for a 1000 hp build. Is there any truth to this or is it bollocks ? Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted July 17, 2019 Share Posted July 17, 2019 I have no technical input to add. But that sounds like brand loyalty to me. If the part is advertised as being suitable for the application I would suspect it's perfectly safe. Mahle are a well know and used manufacturer. Quote Link to comment Share on other sites More sharing options...
Lee P Posted July 17, 2019 Share Posted July 17, 2019 Mahle or Manley are fine, personally I dont like CP much but I know in the Us they use them aloy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.