calsupra Posted July 9, 2019 Share Posted July 9, 2019 Went for a drive on sunday and filled up with fuel, shortly after i booted it off a roundabout and the engine management light and the red warning light came on, the car sounded fine but on 4000+ rpm it would missfire and hold back so i pulled over and turned the car off and then it would not start. I had a mechanic check it over and he said it had spark and fuel but when you turn the key it would crank over but not even try to fire up and theres a sort of knocking noise from the boot area that i dont normally hear. So i had the car recovered back home where its sitting in the garage Link to comment Share on other sites More sharing options...
Swampy442 Posted July 9, 2019 Share Posted July 9, 2019 Pull the error codes, see whats wrong with it Link to comment Share on other sites More sharing options...
rider Posted July 9, 2019 Share Posted July 9, 2019 Check your crank pulley hasn't stripped. The ceramic grooves can shatter or even become free rotating after a couple of decades. Link to comment Share on other sites More sharing options...
calsupra Posted July 9, 2019 Author Share Posted July 9, 2019 Pull the error codes, see whats wrong with it I did disconnect the battery so i dont know if it might of erased any codes but i tried it anyway and im getting code 22, water temp sensor circuit Link to comment Share on other sites More sharing options...
calsupra Posted July 9, 2019 Author Share Posted July 9, 2019 just noticed the wire on the water temp sensor have broke off, im guessing thats the issue Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now