Noz Posted April 22, 2019 Share Posted April 22, 2019 Thoughts would be welcome guys. Looking to buy a turbo soon. As in immediately really. NAt R154 stock cams. Want a little room to grow but 600 min is the goal without restricting myself down the line. I've no experience with borg Warner. Quote Link to comment Share on other sites More sharing options...
bignum Posted April 22, 2019 Share Posted April 22, 2019 Im very happy with my 366 but might be a little laggy on the 154 depending on what diff ratio you have, 362 will do 600 comfortably, 366 more like 800. Quote Link to comment Share on other sites More sharing options...
Clausz Posted April 22, 2019 Share Posted April 22, 2019 I have the BL366 (just upgraded compressor wheel) and it made 700hp @ 1,7 bars with 264 BC cams. Quote Link to comment Share on other sites More sharing options...
Noz Posted April 22, 2019 Author Share Posted April 22, 2019 What's the 366 like on the road Bignum? Are you 6 speed? I've always thought the R154 was similar to the v160 just without the final drive. I've an NA LSD a01b. Clausz when do you get full boost? Quote Link to comment Share on other sites More sharing options...
black_widow87 Posted April 22, 2019 Share Posted April 22, 2019 Id recommend the S364. Not been on the rollers with mine yet since the install but I'd say it's producing around 650 at 1.5bar on an unopened engine. Quote Link to comment Share on other sites More sharing options...
Mk4Gaz Posted April 22, 2019 Share Posted April 22, 2019 My s362 produces 590bhp at 1.4bar on an unopened engine. I've got a set of 264's to fit, which should give a slight increase at the same boost level. Mine starts spooling at circa 3200rpms and full boost at 4000rpms. Looking at that graph above, it looks like full boost comes in around 4500rpms on the s366 Quote Link to comment Share on other sites More sharing options...
sebas Posted April 23, 2019 Share Posted April 23, 2019 My S300SXE 62mm prduces 602bhp @1.4bar and 714Nm 2jzgte VVTi and V161 Spools very simlar to what Mk4Gaz said, maybe a litlle bit sooner (VVTi engine) Quote Link to comment Share on other sites More sharing options...
nigelboyne Posted April 23, 2019 Share Posted April 23, 2019 Is anyone running the smaller sxe 257/258, thinking bout going single looking for similar spool to bpu with 100hp more 530ish up. Quote Link to comment Share on other sites More sharing options...
bignum Posted April 25, 2019 Share Posted April 25, 2019 What's the 366 like on the road Bignum? Are you 6 speed? I've always thought the R154 was similar to the v160 just without the final drive. I've an NA LSD a01b. Clausz when do you get full boost? Mines great on the road, yes 6 speed but auto tt diff so 3.7 ratio, hits full boost by 4k and pulls well to 7.5k, its a built engine with 264 cams and ported/angled seat head, the car is stripped, also makes positive boost in 6th @ 2k. Quote Link to comment Share on other sites More sharing options...
Burna Posted April 26, 2019 Share Posted April 26, 2019 Is anyone running the smaller sxe 257/258, thinking bout going single looking for similar spool to bpu with 100hp more 530ish up. I was advised by Bignum that it would be too small mate, and was advised to go with the Airwerks S361SX-E, which I did, and I love it. https://www.aet-turbos-shop.com/collections/borgwarner-airwerks/products/borgwarner-airwerks-s361sxe-turbocharger?variant=13055159205941 Mine is the T4 Divided 0.91AR Quote Link to comment Share on other sites More sharing options...
Wez Posted April 26, 2019 Share Posted April 26, 2019 I was advised by Bignum that it would be too small mate, and was advised to go with the Airwerks S361SX-E, which I did, and I love it. https://www.aet-turbos-shop.com/collections/borgwarner-airwerks/products/borgwarner-airwerks-s361sxe-turbocharger?variant=13055159205941 Mine is the T4 Divided 0.91AR Bargain, nice tubby by looks of it, does it have 3" vband exhaust side? Quote Link to comment Share on other sites More sharing options...
Burna Posted April 26, 2019 Share Posted April 26, 2019 Bargain, nice tubby by looks of it, does it have 3" vband exhaust side? Yes mate it does Quote Link to comment Share on other sites More sharing options...
Wez Posted April 26, 2019 Share Posted April 26, 2019 Yes mate it does �� Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.