Glover Posted March 21, 2019 Share Posted March 21, 2019 The sills have seen better days on my car, I’m assuming I can get them re-welded? Anyone had this done and can recommend a good company (as close to Sheffield as poss) Cheers Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted March 21, 2019 Share Posted March 21, 2019 You could buy the complete sill panels in the past, that would make an easy job for a good body shop. Quote Link to comment Share on other sites More sharing options...
Noz Posted March 21, 2019 Share Posted March 21, 2019 I had half of mine remade. Due to mainly having wider arches and moving the rear vent to suit. But a decent panel beater who can paint should have no problem making you well formed sills. Quote Link to comment Share on other sites More sharing options...
Glover Posted March 21, 2019 Author Share Posted March 21, 2019 Great. Thanks for the info, I’ll nip to a body shop and ask for some advice! Quote Link to comment Share on other sites More sharing options...
jim_supra Posted March 21, 2019 Share Posted March 21, 2019 (edited) You can still get the outer sill panels from Toyota or Keron at Extreme performance, however they are only the central section of the sill. If you want the forward section you need to buy the entire A pillar panel, and for the rear section you'd need to buy the rear quarter panel. See pic attached. As others have said, it might be better to find a good panel beater to get the section you need. Edited March 21, 2019 by jim_supra (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.