Glover Posted January 10, 2019 Share Posted January 10, 2019 I need to change both my rear tyres because they will definitely fail on the MOT with the cracking on them. Currently on are 275 40 r17’s but my local tyre shops don’t have any of these in stock and recommend 255’s . I don’t know the make of the alloys and I’ll post a picture of them later if anyone would know what they are called as I’d like to know. Wanting to know what ideally should be on the car. 93 N/A JDM. Any help or advice from wheel gurus on here would be ace. Thanks Link to comment Share on other sites More sharing options...
Glover Posted January 10, 2019 Author Share Posted January 10, 2019 Best image I can find on my phone of them Link to comment Share on other sites More sharing options...
Ric Posted January 10, 2019 Share Posted January 10, 2019 need to know the width of the wheels. the xx-j Link to comment Share on other sites More sharing options...
Glover Posted January 10, 2019 Author Share Posted January 10, 2019 Would this be stamped inside the alloy ? Or is it easier just to measure them? Link to comment Share on other sites More sharing options...
AC93 Posted January 10, 2019 Share Posted January 10, 2019 Should be stamped somewhere, it will say 9J or 10.5J etc Link to comment Share on other sites More sharing options...
Glover Posted January 10, 2019 Author Share Posted January 10, 2019 Perfect, cheers, I’ll have a look after work tonight and find it out ! Link to comment Share on other sites More sharing options...
rider Posted January 11, 2019 Share Posted January 11, 2019 Once you find the wheel stamp you need to then work within the correct width restrictions for that size wheel. Link to comment Share on other sites More sharing options...
Glover Posted January 11, 2019 Author Share Posted January 11, 2019 That’s great, just what I needed. thank you!!! Link to comment Share on other sites More sharing options...
nigelboyne Posted January 11, 2019 Share Posted January 11, 2019 275/40/17 very hard to get I had to go 265/40/17 hankook ventus you should have no prob getting that size, however make sure your wheels are at least 9inch width Link to comment Share on other sites More sharing options...
Glover Posted January 11, 2019 Author Share Posted January 11, 2019 275/40/17 very hard to get I had to go 265/40/17 hankook ventus you should have no prob getting that size, however make sure your wheels are at least 9inch width That’s what I’m finding now, yeah they did mention they had some 265’s in stock. I’ll see what mine measure and maybe drop to that if that turns out better for the size of alloy. Link to comment Share on other sites More sharing options...
nigelboyne Posted January 11, 2019 Share Posted January 11, 2019 275 or 265 hardly anything in difference in fact I think better grip from 265 on the 9.5inch wheel Link to comment Share on other sites More sharing options...
Spunkmeyer Posted January 12, 2019 Share Posted January 12, 2019 I switched out 19” 275/30 for 265/35 and the ride was much much better. Prefer chunkier tyre than thinner tyre look but comfort was improved no doubt Link to comment Share on other sites More sharing options...
nigelboyne Posted January 12, 2019 Share Posted January 12, 2019 I switched out 19” 275/30 for 265/35 and the ride was much much better. Prefer chunkier tyre than thinner tyre look but comfort was improved no doubt /QUOTE] Amazing what increasing the side wall by 10mm, once you don't go to far away from the original diameter. Link to comment Share on other sites More sharing options...
Glover Posted February 19, 2019 Author Share Posted February 19, 2019 Finally got round to checking and the wheels say 17x19 1/2, so I’m safe to assume that a true width of 255 or 265 is ideal? Also what profile would be good for this? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now