Sooty Posted January 10, 2019 Share Posted January 10, 2019 Mines ECU for a manual 2JZ-GE This is a plug and play ECU upgrade for NA manual cars made by Mines. I found this made a significant improvement to both response and acceleration on my car. The ECU removes the factory speed limiter, increases the rev limit to 8200rpm (though I have never taken it this high - only to around 8000rpm) and the map increases the peak power to around 240bhp with supporting mods (i.e. air filter, decat and aftermarket exhaust). The previous owner carried out dyno power runs with this and a stock ecu to compare the two and from memory it increased the power and torque output by around 5-10% over a significant portion of the rev range and removed the dip caused from the ACIS butterfly valve opening at around 5000rpm. The ECU is in fully working condition with the warranty sticker intact - removed from my car last weekend. I have had this on my car for the last 3 years and it has worked flawlessly. I am installing a turbo so I no longer need this. I am looking for £350 for it excluding postage - I can post this however collection from the Bristol area would be preferred. Link to comment Share on other sites More sharing options...
Kendo11 Posted January 19, 2019 Share Posted January 19, 2019 GLWS, have one of these on mine. Absolutely awesome bit of kit. Link to comment Share on other sites More sharing options...
Sooty Posted January 28, 2019 Author Share Posted January 28, 2019 Thanks and I agree, this really helped to put off my need for more power - well at least for a few years. Link to comment Share on other sites More sharing options...
Sooty Posted February 20, 2019 Author Share Posted February 20, 2019 Bump and price dropped to £350 excluding postage Link to comment Share on other sites More sharing options...
Sooty Posted March 6, 2019 Author Share Posted March 6, 2019 Bump Link to comment Share on other sites More sharing options...
Sooty Posted March 26, 2019 Author Share Posted March 26, 2019 Bump Link to comment Share on other sites More sharing options...
mikeekim89 Posted March 30, 2019 Share Posted March 30, 2019 Will this work on my auto-manual conversion? I haven't replaced the loom Link to comment Share on other sites More sharing options...
Sooty Posted April 2, 2019 Author Share Posted April 2, 2019 Will this work on my auto-manual conversion? I haven't replaced the loom The following link shows the differences between the wiring of an auto and manual 2JZ GE ECU (the blue text is for the auto functions). I am not 100% sure if the pins for the auto only terminals are present on the manual ecu's but to be honest it would be easy to just depin these terminals from the loom connector if you haven't already done so. Pins 76 and 77 should be connected together which it looks like this must be done as part of the conversion anyway? I would therefore be reasonably confident that it would work. http://wilbo666.pbworks.com/w/page/41678224/2JZ-GE%20JZA80%20Supra%20Engine%20Wiring Link to comment Share on other sites More sharing options...
Sooty Posted April 15, 2019 Author Share Posted April 15, 2019 bump Link to comment Share on other sites More sharing options...
mc92 Posted April 15, 2019 Share Posted April 15, 2019 How much would you want for postage to SG8? I may be interested when I next get paid Link to comment Share on other sites More sharing options...
Sooty Posted April 15, 2019 Author Share Posted April 15, 2019 I think postage with royal mail special delivery (which includes upto £500 compensation for theft or damage) would be just over £10 - so would make it £360 including postage Link to comment Share on other sites More sharing options...
Sooty Posted April 26, 2019 Author Share Posted April 26, 2019 bump Link to comment Share on other sites More sharing options...
Sooty Posted May 8, 2019 Author Share Posted May 8, 2019 bump Link to comment Share on other sites More sharing options...
Recommended Posts