The Raven Posted November 6, 2018 Share Posted November 6, 2018 (edited) My custom rear lights have both cracked, I don’t really know why they did this but needless to say they can’t stay like this. One option is to sell as is at massive loss or I try and swap the outside covers. So how long at what temp In the oven? Edited November 6, 2018 by The Raven (see edit history) Link to comment Share on other sites More sharing options...
ripped_fear Posted November 6, 2018 Share Posted November 6, 2018 speak with mat davis he has split loads of sets Link to comment Share on other sites More sharing options...
rider Posted November 7, 2018 Share Posted November 7, 2018 oven for 10mins at 80degrees Link to comment Share on other sites More sharing options...
The Raven Posted November 7, 2018 Author Share Posted November 7, 2018 Awesome thanks Link to comment Share on other sites More sharing options...
mattdavies Posted November 7, 2018 Share Posted November 7, 2018 I would go for more 5 minutes then 2-3 minutes after that if the sticky stuff hasn't gone soft enough I might of just had a hot oven but you don't want to go OTT as the rear can start to curve ever so slightly. Also remember there are three little screws along the top under the lip that need removing. FYI facelift and pre-facelift are the same clear cover Link to comment Share on other sites More sharing options...
MKIV_Danny Posted November 7, 2018 Share Posted November 7, 2018 I opened up my head and taillights. Both in oven at 110 degrees for 5-6 minutes. If it still not enough, try carefully to use an heatingfan to heat the "cold" spots. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now