Big Mark Posted November 1, 2018 Share Posted November 1, 2018 SRT-8 Brembo Big Front Brake Kit - Never used. Got the full kit for my car but fronts wouldn't fit, These are the same brakes as on the cars of Glanza_Mike (sold to another member since), Girth45 and Delboy52 Massive 6 pot Brembo calipers as used on the 6.4litre V8 Jeep SRT-8 - modded ready to bolt straight on. 360mm Brembo drilled discs from the Lexus ISF - go straight on and cheaper than Supra discs! Adaptor plates, nuts & bolts etc to fit these to the Supra. Added bonus is that these calipers take the same pads as a Nissan R35 GTR so lots of performance options out there. Update: Just found the Stoptech stainless steel braided brake lines that came with the kit unused in the same box as the pads and pins/shims etc that hold the pads in. Kit comes with brand new Chris Wilson brake pads These are BIG brakes, so like most of the others that have these the huge cast aluminium calipers had a little of the edge sanded off to try and clear wheels, but in then end I set of different brakes instead. Calipers have just been resprayed and look even better than when I first got them as no chips from shipping. Pics of calipers taken at the bodyshop, I'll be collecting them this weekend. [ATTACH=CONFIG]229719[/ATTACH] [ATTACH=CONFIG]229720[/ATTACH] [ATTACH=CONFIG]229721[/ATTACH] Brembo discs [ATTACH=CONFIG]229722[/ATTACH] [ATTACH=CONFIG]229723[/ATTACH] Can add pics of the adapters and fixings etc if needed at weekend. £1100 collected from OX16 or possible CV3 as these are too bulky and heavy to ship. Link to comment Share on other sites More sharing options...
PJJ Posted November 1, 2018 Share Posted November 1, 2018 Wow, that's one hell of a set of brakes for someone. Out of curiosity, what size wheels are needed to fit these on? Link to comment Share on other sites More sharing options...
Big Mark Posted November 1, 2018 Author Share Posted November 1, 2018 I know 2 of the guys mentioned have 19's, but my 19s wouldn't clear them, but that was down to the shape of the inside barrel of my wheel. Link to comment Share on other sites More sharing options...
PJJ Posted November 1, 2018 Share Posted November 1, 2018 Shame that you have to sell them Mark. I only have 18's on mine so I'd have no chance. Can't imagine them staying for sale long though, I'm sure anyone building a car will snap them up. Link to comment Share on other sites More sharing options...
Big Mark Posted November 1, 2018 Author Share Posted November 1, 2018 I know it's a shame but instead went with Brembo GT's on the front and just used the rear Brembo SRT-8 kit. So at least I still have Brembo's front and rear to calm my OCD. Link to comment Share on other sites More sharing options...
Big Mark Posted November 2, 2018 Author Share Posted November 2, 2018 First post updated as I've just found that new braided hoses that came with the kit. Thought I had fitted them on my car, but apparently not. So this is literally everything you need to upgrade to a Big Brembo Brake setup. [ATTACH=CONFIG]229726[/ATTACH] Link to comment Share on other sites More sharing options...
Big Mark Posted November 12, 2018 Author Share Posted November 12, 2018 Link to comment Share on other sites More sharing options...
Big Mark Posted November 18, 2018 Author Share Posted November 18, 2018 Link to comment Share on other sites More sharing options...
Big Mark Posted November 27, 2018 Author Share Posted November 27, 2018 Link to comment Share on other sites More sharing options...
Big Mark Posted December 8, 2018 Author Share Posted December 8, 2018 Link to comment Share on other sites More sharing options...
Big Mark Posted December 16, 2018 Author Share Posted December 16, 2018 Weekend Link to comment Share on other sites More sharing options...
Big Mark Posted December 27, 2018 Author Share Posted December 27, 2018 Link to comment Share on other sites More sharing options...
Recommended Posts