ChrisMK4 Posted August 28, 2018 Share Posted August 28, 2018 Hello fellow Supra fans, please look at the following picture: This should be the lower rear control arm of my Supra TT. Unfortunately my car is not home but in the shop at the moment and I cannot access it within the next few days. What I would like to know is the following: There is this "hole" in the middle of the arm. There seems to belong some kind of joint or bearing into it. But I do not know which exactly and to what it is connected. The idiot from the shop removed it mistakenly and now I have to get another one but I do not know what belongs in there. Can anyone help me out with a picture or a link or somethig? Thank you very much! Chris Link to comment Share on other sites More sharing options...
rider Posted August 28, 2018 Share Posted August 28, 2018 That's where the drop link from your anti roll bar goes. Link to comment Share on other sites More sharing options...
Scooter Posted August 28, 2018 Share Posted August 28, 2018 In the big hole near the bottom of the picture should be a bush, I also think this bush is one of those that if different for face lifts so you'll have to be careful ordering one. Get them to measure the diameter. Link to comment Share on other sites More sharing options...
Scooter Posted August 28, 2018 Share Posted August 28, 2018 http://http://www.mkivsupra.net/vbb/showthread.php?345585-Facelift-and-pre-facelift-suspension-arms&highlight=Facelift+bushes Link to comment Share on other sites More sharing options...
ChrisMK4 Posted September 4, 2018 Author Share Posted September 4, 2018 Thank you guys very much! Link to comment Share on other sites More sharing options...
Dnk Posted September 4, 2018 Share Posted September 4, 2018 (edited) That's where the drop link from your anti roll bar goes. It's where the damper attaches to the lower arm, as said there should be bush in it with a steel sleeve Edited September 4, 2018 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
ChrisMK4 Posted September 9, 2018 Author Share Posted September 9, 2018 It's where the damper attaches to the lower arm, as said there should be bush in it with a steel sleeve Exactly. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now