phobos Posted July 19, 2018 Share Posted July 19, 2018 Hi, looking for a set of TTE Grand Stand (Supra fitment 8.5x18 / 10x18). Cheers! Link to comment Share on other sites More sharing options...
evinX Posted July 19, 2018 Share Posted July 19, 2018 Diamond cut or painted? There were 2 finishes. The painted ones are fairly available from breakers yards with gs300s. Havnt seen the diamond cut ones around anywhere for years. Link to comment Share on other sites More sharing options...
phobos Posted July 20, 2018 Author Share Posted July 20, 2018 Painted would be fine for me. Do you have any good addresses? There's not a lot of Lexus breakers here in Germany. Link to comment Share on other sites More sharing options...
Scooter Posted July 20, 2018 Share Posted July 20, 2018 I have a set (Diamond cut) that are a bit tired with some lacquer peel etc I will get some pics on Monday as I'm away over the weekend. Link to comment Share on other sites More sharing options...
phobos Posted July 20, 2018 Author Share Posted July 20, 2018 Sounds good, thanks! Link to comment Share on other sites More sharing options...
Scooter Posted July 20, 2018 Share Posted July 20, 2018 Found a pic, up close they don't look as good! So will still get others Monday. They do have the TTE caps rather then the Lexus 'L' ones which I think is more desirable? Link to comment Share on other sites More sharing options...
phobos Posted July 20, 2018 Author Share Posted July 20, 2018 As long as they don't have any excessive run-out and the condition is refurbishable it's a question of price. Link to comment Share on other sites More sharing options...
Scooter Posted July 20, 2018 Share Posted July 20, 2018 not sure how to check run out, bolt to the hub and use a dial gauge on the rim I suppose? Link to comment Share on other sites More sharing options...
Dnk Posted July 20, 2018 Share Posted July 20, 2018 not sure how to check run out, bolt to the hub and use a dial gauge on the rim I suppose? You'll see run out a mile off with just your eyes Link to comment Share on other sites More sharing options...
phobos Posted July 20, 2018 Author Share Posted July 20, 2018 Dial gauge on a tire mount machine is ideal but as long as the wheels do not cause any vibrations they're fine for me. Link to comment Share on other sites More sharing options...
Scooter Posted July 20, 2018 Share Posted July 20, 2018 They are off the car now as the tyres got towards illegal, I drove them through a fair few mm's of rubber with no issues. I will clean up the inners and have a good look for any cracks as I know they can develop them. Will report back Monday evening! Link to comment Share on other sites More sharing options...
phobos Posted July 20, 2018 Author Share Posted July 20, 2018 OK, perfect. Link to comment Share on other sites More sharing options...
Scooter Posted August 7, 2018 Share Posted August 7, 2018 sample pics last pic a different wheel from the others (next on the stack) Link to comment Share on other sites More sharing options...
phobos Posted September 19, 2018 Author Share Posted September 19, 2018 Anybody else selling a set? A friend is also looking for those wheels. Link to comment Share on other sites More sharing options...
Recommended Posts