Ozy1986 Posted April 15, 2018 Share Posted April 15, 2018 Good evening, I’m looking to get some new wheels on my Supra before Japfest. I’m looking at getting some machined silver jr10s on my white Supra. I’m looking for some sort of aggressive look. Thinking of 18” 8.5j et 25 for front and 10.5j et 25 on the rear. Also looking to use my existing tyres which are 275/35/18. My rear arch’s are already rolled. Just trying to figure out if the rears should go on with out any problems. Could anyone advise if this would fit the stock Supra or need to make some more mods?? Thanks in advance. Ozy. Quote Link to comment Share on other sites More sharing options...
JamieP Posted April 15, 2018 Share Posted April 15, 2018 Fronts be fine, rear that’s bit of a poke. Quote Link to comment Share on other sites More sharing options...
Ozy1986 Posted April 15, 2018 Author Share Posted April 15, 2018 Thanks for the reply Jamie. Hopefully I’m looking to get the rear arch’s flared at some point and get some coilovers. With that in mind I thought I’d try and get some alloys that would look good with that. Not too sure if there will be any arch rubbing going on before flaring. There a mixture of responses online. Only one way to find out I suppose. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted April 16, 2018 Share Posted April 16, 2018 For reference I fitted JR20s which were 11J width, ET35 offset and a 305 width AD08R tyre. When I was looking to buy these wheels Driftworks said recommended that I used stretched tyre and camber to make them fit. So I brought them from jdmdistro used a proper sized tyre, correct geometry and modified the arches to suit. Pics attached. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.