griffsplace Posted March 26, 2018 Share Posted March 26, 2018 So I sold my Gandors and replaced with Oems. My car has the folding option switch so in trying to get them to work they make a little noise but don't fold. Into investigation mode, open them up and try sticking 12v on the motor terminals, hey presto it works one way, reverse the positive and negative it goes back. Motor works. Then there is the small circuit board between the input wires and the motor, a couple of resistors two capacitors and a relay. I don't understand the working of the circuit, but am more than capable of un soldering one set of components and soldering in new ones. Nothing looks burnt out or obviously damaged. Has any one ever tried this, success?? Quote Link to comment Share on other sites More sharing options...
Burna Posted March 26, 2018 Share Posted March 26, 2018 TrickTT a member on here has recently been messing about with his mirrors, drop him a PM, he may be able to help you Quote Link to comment Share on other sites More sharing options...
evinX Posted March 26, 2018 Share Posted March 26, 2018 here ya go Quote Link to comment Share on other sites More sharing options...
Animato Posted March 27, 2018 Share Posted March 27, 2018 here ya go Great thread, I am looking into bringing back the OEM left power folding mirror in place as well. Thanks for the info so far ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.