Jellybean Posted March 18, 2018 Share Posted March 18, 2018 Hi Car: 2JZGTE JDM PT 6466 Gen2 ECU: Motec M1 ECU with provisions for Water methanol **In Ireland , its near impossible to get E85 , Flexi fuel sensor is not a viable option John Reed firmware is based upon MoTeC GPR package which includes the following features: Water injection control - with failsafe for boost/timing/fuel based on pressure sensor feedback Water injection: John said he usually grabs pump and nozzle. Reservoir depends application. Then I just use a relay to let the M1 trigger the pump, and a 150psi pressure sensor in the meth line between pump and nozzle for the failsafe.PT Any recommendations on , pump , nozzle , relay and pressure sensor ? I was talking to Dave Rowe but he never got back yet with recommendations Link to comment Share on other sites More sharing options...
Frank Bullitt Posted March 18, 2018 Share Posted March 18, 2018 Speak to Richard at Aquamist, he will be able to sort you out with something. Link to comment Share on other sites More sharing options...
Mike2JZ Posted March 18, 2018 Share Posted March 18, 2018 Aquamist sell the individual components you are looking for. Link to comment Share on other sites More sharing options...
Jellybean Posted March 18, 2018 Author Share Posted March 18, 2018 Cool thanks AEM kit is a waste of money as I do not need the controller Link to comment Share on other sites More sharing options...
Frank Bullitt Posted March 18, 2018 Share Posted March 18, 2018 Cool thanks AEM kit is a waste of money as I do not need the controller AEM is shyte in comparison. As you have the best aftermarket ECU you might as well go for the best WI available. Link to comment Share on other sites More sharing options...
Jellybean Posted March 18, 2018 Author Share Posted March 18, 2018 Will see what Richard recommends Link to comment Share on other sites More sharing options...
pf85 Posted March 4, 2019 Share Posted March 4, 2019 Hi Jellybean, What did you end up going for in the end? I am considering fitting a Water Meth Injection kit to mine.. Link to comment Share on other sites More sharing options...
Jellybean Posted March 4, 2019 Author Share Posted March 4, 2019 Currently having it installed but I just need a relay and pump, nozzle to work with my ecu Was told the aem pump works reliable but I don't want to buy the whole kit as not needed Aquamist, I gave up trying to get a reply Link to comment Share on other sites More sharing options...
phobos Posted March 5, 2019 Share Posted March 5, 2019 We've just integrated a Snow Performance kit into a 996T with MaxxECU. The kit is however only used for spraying water on the intercoolers (which works like a charm). The kit was pre-installed when we installed the MaxxECU and connected to the OEM MAF sensor IIRC. The controller expects a 0-5V signal you can configure the voltage levels where it starts spraying and where it is running the pmp at full power. We set the starting level to slightly above 0V and full power level to slightly below 5V. In the MaxxECU we can now control the kit with a map based on IAT, boost, or whatever we like. The basic principle would be the same for water-meth injection. We only need to add a pressure sensor to the water lines, that's missing in the kit. - - - Updated - - - We've just integrated a Snow Performance kit into a 996T with MaxxECU. The kit is however only used for spraying water on the intercoolers (which works like a charm). The kit was pre-installed when we installed the MaxxECU and connected to the OEM MAF sensor IIRC. The controller expects a 0-5V signal you can configure the voltage levels where it starts spraying and where it is running the pmp at full power. We set the starting level to slightly above 0V and full power level to slightly below 5V. In the MaxxECU we can now control the kit with a map based on IAT, boost, or whatever we like. The basic principle would be the same for water-meth injection. We only need to add a pressure sensor to the water lines, that's missing in the kit. Link to comment Share on other sites More sharing options...
jjs_82 Posted March 5, 2019 Share Posted March 5, 2019 Where you going to get the methanol? Link to comment Share on other sites More sharing options...
Wez Posted March 5, 2019 Share Posted March 5, 2019 Why is a flexfuel not viable. If you can get methanol for WI kit you could mix in the tank with flexfuel and not have all the extra WI kit to go wrong, I am guessing your ECU can support flexfuel, if not then obviously this is not an option Link to comment Share on other sites More sharing options...
Jellybean Posted March 5, 2019 Author Share Posted March 5, 2019 Why is a flexfuel not viable. If you can get methanol for WI kit you could mix in the tank with flexfuel and not have all the extra WI kit to go wrong, I am guessing your ECU can support flexfuel, if not then obviously this is not an option methanol is too expensive, was just going to use water Priced it here, its 65 euro for 19 litres I am installing a flexifuel sensor too Link to comment Share on other sites More sharing options...
Jellybean Posted April 8, 2019 Author Share Posted April 8, 2019 Can I ask a noob question, flexi fuel sensor Does this run with ethanol only or can it run with methanol? Does it require a specific tune for each? Big price difference between methanol and ethanol Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now